Abstract:Digital Light Processing (DLP) is a 3D printing technology that enables the fabrication of complex, high-resolutionstructures; however, the mechanical properties of DLP-printed objects are often limited by the resins used. This study focuses on developing and characterizing bio-based polyester UV-curable resins with tunable mechanical properties optimized for DLP 3D printing. Bio-based polyester resins were synthesized by direct esterification polycondensation reaction of itaconic and/or succinic acids with 1,2-propane-, 1,4-butane-, and/or 1,8-octanediols followed by blending with triethylene glycol dimethacrylate. The bio-renewable nature of the resin components provides several advantages over traditional petroleum-derived resins. The diacid and diol monomers come from renewable feedstocks such as corn, soybean, and vegetable oils rather than finite fossil fuel reserves. Furthermore, bio-renewable materials lower dependence on petrochemicals and increase the sustainability of 3D printing. The effects of diacid structure and diol chain length on resin properties were systematically investigated. Chemical characteristics were investigated by NMR and FTIR and suggested successful synthesis of the desired bio-based polyesters. By varying the molecular design, diacid, and diol building blocks, the molecular weight, crosslink density, and mechanical performance were tailored. The liquid resins were characterized by gel permeation chromatography and rheological measurements, and solid and printed objects were characterized by static and dynamic tensile testing. Rheological studies confirmed all resin formulations displayed shear-thinning behavior ideal for SLA printing. Mechanical testing revealed that varying diacid and diol components could modulate tensile elastic modulus and elongation at break from 0.1-1.0 GPa and 3.5-8.5%, respectively. Printability was assessed by printing a resolution test structure on a DLP 3D printer equipped with a 405 nm UV source. This ability to tailor the properties of bio-based polyester resins by molecular design provides an avenue for fabricating high-performance SLA-printed objects targeted for specific applications ranging from prototypes to end-use products.

Synthesis of bio-sourced liquid resins and their photopolymerization with poly(ethylene glycol) diacrylate in the roadmap to more sustainable digital light processing technologies

Synthesis of Bio-Based Polyester Resins for Vat Photopolymerization 3D Printing

DLP 3D printing of levoglucosenone‐based monomers: exploiting thiol‐ene chemistry for bio‐based polymeric resins

A renewably sourced, circular photopolymer resin for additive manufacturing

Glycerol-based Sustainably Sourced Resin for Volumetric Printing

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligoester Resins via Diacid and Diol Exploration

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligomeric Polyester Resins via Diacid and Diol Exploration

A Bio-Based Resin for a Multi-Scale Optical 3D Printing

Phosphorescent bio-based resin for digital light processing (DLP) 3D-printing

Sustainable and Recyclable Acrylate Resins for Liquid-Crystal Display 3D Printing Based on Lipoic Acid

Synthesis of a Liquid Lignin-Based Methacrylate Resin and Its Application in 3D Printing without Any Reactive Diluents

Development of recyclable bio-based epoxy/acrylate blends for liquid crystal display 3D printing

Biodegradable Poly(ester) Urethane Acrylate Resins for Digital Light Processing: From Polymer Synthesis to 3D Printed Tissue Engineering Constructs

Vat Photopolymerization 3D-Printing of Dynamic Thiol-Acrylate Photopolymers Using Bio-Derived Building Blocks

Recyclable photoresins for light-mediated additive manufacturing towards Loop 3D printing

Synthesis and Solvent Free DLP 3D Printing of Degradable Poly(Allyl Glycidyl Ether Succinate)

Improving the 3D Printability and Mechanical Performance of Biorenewable Soybean Oil-Based Photocurable Resins

Digital Light Processing to Afford High Resolution and Degradable CO2‐Derived Copolymer Elastomers

Multi-Material 3D Printing of Biobased Epoxy Resins

Renewable Methacrylate Resins for 3D Printing Containing Dynamic Hydroxyester Linkages for Reprocessability

Digital Light Processing of Dynamic Bottlebrush Materials