Abstract:Amorphous indium-gallium-zinc oxide (a-IGZO) has become a standard channel ingredient of switching/driving transistors in active-matrix organic light-emitting diode (AMOLED) televisions. However, mobile AMOLED displays with a high pixel density (≥500 pixels per inch) and good form factor do not often employ a-IGZO transistors due to their modest mobility (10-20 cm2/(V s)). Hybrid low-temperature polycrystalline silicon and oxide transistor (LTPO) technology is being adapted in high-end mobile AMOLED devices due to its ultralow power consumption and excellent current drivability. The critical issues of LTPO (including a complicated structure and high fabrication costs) require a search for alternative all-oxide thin-film transistors (TFTs) with low-cost processability and simple device architecture. The atomic layer deposition (ALD) method is a promising route for high-performance all-oxide TFTs due to its unique features, such as in situ cation composition tailoring ability, precise nanoscale thickness controllability, and excellent step coverage. Here, we report an in-depth comparative investigation of TFTs with indium-gallium oxide (IGO)/gallium-zinc oxide (GZO) and indium-zinc oxide (IZO)/GZO heterojunction stacks using an ALD method. IGO and IZO layers with different compositions were tested as a confinement layer (CL), whereas the GZO layer was used as a barrier layer (BL). Optimal IGO/GZO and IZO/GZO channels were carefully designed on the basis of their energy band properties, where the formation of a quasi-two-dimensional electron gas (q2DEG) near the CL/BL interface is realized by rational design of the band gaps and work-functions of the IGO, IZO, and GZO thin films. To verify the effect of q2DEG formation, the device performances and stabilities of TFTs with CL/BL oxide heterojunction stacks were examined and compared to those of TFTs with a single CL layer. The optimized device with the In0.75Zn0.25O/Ga0.80Zn0.20O stack showed remarkable electrical performance: μFE of 76.7 ± 0.51 cm2/(V s), VTH of -0.37 ± 0.19 V, SS of 0.13 ± 0.01 V/dec, and ION/OFF of 2.5 × 1010 with low operation voltage range of ≥2 V and excellent stabilities (ΔVTH of +0.35, -0.67, and +0.08 V for PBTS, NBIS, and CCS, respectively). This study suggests the feasibility of using high-performance ALD-derived oxide TFTs (which can compete with the performance of LTPO transistors) for high-end mobile AMOLED displays.

Stacked indium oxide/zinc oxide heterostructures as semiconductors in thin film transistor devices: a case study using atomic layer deposition

Atomic Layer Deposition of Ternary Indium/Tin/Aluminum Oxide Thin Films, Their Characterization and Transistor Performance under Illumination.

Modulation of Interface and Bulk States in Amorphous InGaZnO Thin-Film Transistors with Double Stacked Channel Layers

Electrospun Stacked Dual‐Channel Transistors with High Electron Mobility Using a Planar Heterojunction Architecture

Atomically Thin Indium-Tin-Oxide Transistors Enabled by Atomic Layer Deposition

High-Performance Atomic-Layer-Deposited Indium Oxide 3-D Transistors and Integrated Circuits for Monolithic 3-D Integration

Impact of layer thickness on the operating characteristics of In2O3/ZnO heterojunction thin-film transistors

Self-aligned Top-Gate Amorphous Oxide Thin-Film Transistors with IZO/IGZO Stacked Active Layer and Al Reacted Source/drain Region

Amorphous Semi-Insulating Al-doped In2O3 Growth by Atomic Layer Deposition for Thin-Film Transistors

Rhombohedral-stacked bilayer transition metal dichalcogenides for high-performance atomically thin CMOS devices

High Electron Mobility Thin-Film Transistors Based on Solution-Processed Semiconducting Metal Oxide Heterojunctions and Quasi-Superlattices

Indium–Gallium–Zinc–Oxide Thin-Film Transistors Based on Homojunctioned Structure Fabricated with a Self-Aligned Process

Comparative Study of Atomic Layer Deposited Indium-Based Oxide Transistors with a Fermi Energy Level-Engineered Heterojunction Structure Channel through a Cation Combinatorial Approach

Nitrogen-doped Amorphous Oxide Semiconductor Thin Film Transistors with Double-Stacked Channel Layers

Two-Dimensional Layered Materials Meet Perovskite Oxides: A Combination for High-Performance Electronic Devices

Impact of Layer Configuration and Doping on Electron Transport and Bias Stability in Heterojunction and Superlattice Metal Oxide Transistors

Performance Improvement of Amorphous Thin-Film Transistors with Solution-Processed InZnO/InMgZnO Bilayer Channels

Epitaxial Integration of Transferable High-κ Dielectric and 2D Semiconductor

C -Axis Aligned Composite InZnO via Thermal Atomic Layer Deposition for 3D Nanostructured Semiconductor

Anodization-Induced ZrOx/AlOx Stacked Films for Low-Temperature, Solution-Processed Indium Oxide Thin-Film Transistors

Vertically stacked multilayer atomic-layer-deposited sub-1-nm In2O3 field-effect transistors with back-end-of-line compatibility