Abstract:Recently, two-dimensional (2D) transition metal carbides/nitrides (MXenes) find applications in perovskite solar cells (PSCs), due to their high conductivity, tunable electronic structures, and rich surface chemistry, etc. However, the integration of 2D MXenes into PSCs is limited by their large lateral sizes and relatively-small surface volume ratios, and the roles of MXenes in PSCs are still ambiguous. In this paper, zero-dimensional (0D) MXene quantum dots (MQDs) with an average size of 2.7 nm are obtained through clipping step by step combining a chemical etching and a hydrothermal reaction, which display rich terminals (i.e., -F, –OH, -O) and unique optical properties. The 0D MQDs incorporated into SnO 2 electron transport layers (ETLs) of PSCs exhibit multifunction: 1) increasing the electrical conductivity of SnO 2 , 2) promoting better alignments of energy band positions at the perovskite/ETL interface, 3) improving the film quality of atop polycrystalline perovskite. Particularly, the MQDs not only tightly bond with the Sn atom for decreasing the defects of SnO 2 , but also interact with the Pb 2+ of perovskite. As a result, the defect density of PSCs is significantly decreased from 5.21 × 10 21 to 6.4 × 10 20 cm - 3 , leading to enhanced charge transport and reduced nonradiative recombination. Furthermore, the power conversion efficiency (PCE) of PSCs is substantially improved from 17.44% to 21.63% using the MQDs-SnO 2 hybrid ETL compared with the SnO 2 ETL. Besides, the stability of the MQDs-SnO 2 -based PSC is greatly enhanced, with only ~4% degradation of the initial PCE after storage in ambient condition (25 °C, RH: 30-40%) for 1128 h, as compared to that of the reference device with a rapid degradation of ~60% of initial PCE after 460 h. And MQDs-SnO 2 -based PSC also presents higher thermal stability than SnO 2 -based device with continuous heating for 248 h at 85 °C. The unique MQDs exhibited in this work might also find other exciting applications such as light-emitting diodes, photodetectors, and fluorescent probes.

MXene-based novel nanocomposites doped SnO2 for boosting the performance of perovskite solar cells

Hybridization of SnO 2 and an In-Situ-Oxidized Ti 3 C 2 T x MXene Electron Transport Bilayer for High-Performance Planar Perovskite Solar Cells

Nb2C MXenes modified SnO2 as high quality electron transfer layer for efficient and stability perovskite solar cells

Core-Shell ZnO@SnO2 Nanoparticles for Efficient Inorganic Perovskite Solar Cells.

Performance simulation of the perovskite solar cells with Ti3C2 MXene in the SnO2 electron transport layer

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

Synergistic effect of multifunctional MXene-nanosheet and naphthoquinone sulfonate toward high-performance perovskite solar cells and modules

Multi-functional MXene quantum dots enhance the quality of perovskite polycrystalline films and charge transport for solar cells

SnO2-Ti3C2 Blends As Electron Transport Layer for Efficient and Easily Fabricated Planar Perovskite Solar Cells

Mesoporous SnO₂ Single Crystals As an Effective Electron Collector for Perovskite Solar Cells.

Enhancement of Electron Transport Characteristics Using MXene-MnFeO3 Nanocomposite Integration with Fullerene Derivatives for the Perovskite-Based Solar Cells and Detectors

Interfacial Engineering of Au@Nb2CTx-MXene Modulates the Growth Strain, Suppresses the Auger Recombination, and Enables an Open-Circuit Voltage of over 1.2 V in Perovskite Solar Cells

Enhanced Electronic Properties of SnO2 via Electron Transfer from Graphene Quantum Dots for Efficient Perovskite Solar Cells.

Rational design of SnO 2 -based electron transport layer in mesoscopic perovskite solar cells: more kinetically favorable than traditional double-layer architecture

Ti3C2 MXene Nanosheets–Modified TiO2 Electron‐Transport Layers Enables Efficient Solar Cells with Outstanding Device Consistency

Fabrication of TiO2/MXene Nanohybrid Electron Transport Layer by Artist Spray Gun Assisted Pyrolysis Method for Efficient Carbon Perovskite Solar Cell

Electron transport bilayer with cascade energy alignment based on Nb2O5-Ti3C2 MXene/TiO2 for efficient perovskite solar cells

Anhydrous organic etching derived fluorine-rich terminated MXene nanosheets for efficient and stable perovskite solar cells

Ti3C2 MXene nanosheets modified TiO2 ETLs enables efficient solar cells with outstanding device consistency

Synergistical Transition Metal Ion Co-Doping and Multiple Functional Additive Passivation for Realizing 25.30% Efficiency Perovskite Solar Cells

The dawn of MXene duo: revolutionizing perovskite solar cells with MXenes through computational and experimental methods