Abstract:Defect passivation and tailoring of perovskite–charge transport layer interfaces are critical strategies to minimize the recombination losses and improve the power conversion efficiency (PCE) in perovskite solar cells (PSCs). Herein, we use titanium carbide MXene (Ti3C2T x ) to tailor the electronic properties of the electron transport layer (ETL) and ETL/perovskite interface in inverted (p–i–n) PSCs and correlate them to the observed PCE. MXene doping in a [6,6]-phenyl-C61-butyric acid methyl ester (M-PC61BM)-based ETL results in an improved electrical conductivity and ETL/perovskite interface band alignment. A red shift in the Ag(2) peak in the Raman spectrum and a localized upshift of the Fermi level calculated using scanning Kelvin probe force microscopy (SKPFM) confirm the n-doping of PC61BM. Consequently, PSC devices with M-PC61BM as the ETL show a higher PCE of 18% than PC61BM ETL-based control devices (PCE = 15.2%). Importantly, our study proves that the improvement in the open-circuit voltage (V OC) and fill factor (FF) depends on how MXene is integrated into the PSC, i.e., as a dopant in the PC61BM ETL, an interfacial layer between the perovskite and ETL, or a standalone ETL. Through comprehensive photoluminescence, electrochemical impedance spectroscopy, space-charge limited current, and scanning Kelvin probe force microscopy-based analyses, we establish that the introduction of MXene in PSCs has multiple benefits, including improvement in carrier transport, passivation and trap state reduction, and better interfacial energy alignment. Further, we unravel the most prominent factor influencing device performance in each mode of MXene introduction. Hence, the study reinforces the potential of Ti3C2T x MXene as a versatile material for high-performance electronic and optoelectronic devices.

Ti3C2 MXene nanosheets modified TiO2 ETLs enables efficient solar cells with outstanding device consistency

Ti3C2 MXene Nanosheets–Modified TiO2 Electron‐Transport Layers Enables Efficient Solar Cells with Outstanding Device Consistency

Single-Layered MXene Nanosheets Doping TiO 2 for Efficient and Stable Double Perovskite Solar Cells

Mxene regulates the stress of perovskite and improves interface contact for high-efficiency carbon-based all-inorganic solar cells

Fabrication of TiO2/MXene Nanohybrid Electron Transport Layer by Artist Spray Gun Assisted Pyrolysis Method for Efficient Carbon Perovskite Solar Cell

Anhydrous organic etching derived fluorine-rich terminated MXene nanosheets for efficient and stable perovskite solar cells

Low‐Temperature in Situ Amino Functionalization of TiO2 Nanoparticles Sharpens Electron Management Achieving over 21% Efficient Planar Perovskite Solar Cells

MXene-Based Tailoring of Carrier Dynamics, Defect Passivation, and Interfacial Band Alignment for Efficient Planar p–i–n Perovskite Solar Cells

Electron transport bilayer with cascade energy alignment based on Nb2O5-Ti3C2 MXene/TiO2 for efficient perovskite solar cells

Plasma Oxidized Ti3C2Tx MXene As Electron Transport Layer for Efficient Perovskite Solar Cells

Performance simulation of the perovskite solar cells with Ti3C2 MXene in the SnO2 electron transport layer

SnO2-Ti3C2 Blends As Electron Transport Layer for Efficient and Easily Fabricated Planar Perovskite Solar Cells

Dual Interfacial Modification Engineering with 2D MXene Quantum Dots and Copper Sulphide Nanocrystals Enabled High‐Performance Perovskite Solar Cells

Laser Derived Electron Transport Layers with Embedded p‐n Heterointerfaces Enabling Planar Perovskite Solar Cells with Efficiency over 25%

Hybridization of SnO 2 and an In-Situ-Oxidized Ti 3 C 2 T x MXene Electron Transport Bilayer for High-Performance Planar Perovskite Solar Cells

Nb2C MXenes modified SnO2 as high quality electron transfer layer for efficient and stability perovskite solar cells

Improving Carrier Transport for Stable and Efficient Perovskite Solar Cells Via MXene-modified 2D Perovskite Capping Layer

MXene-Embedded PEDOT:PSS Hole-Transport Material for Lead-Free Perovskite Solar Cells

In Situ Surface Fluorination of TiO 2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet‐Light Stability

Cl-terminated Ti3C2 MXene-modulated carbon/CsPbIBr2 interface boosting efficiency and stability of all-inorganic perovskite solar cells

Buried Interface Modulation via Preferential Crystallization in All‐Inorganic Perovskite Solar Cells: The Case of Multifunctional Ti3C2Tx