Abstract:Defect passivation and tailoring of perovskite–charge transport layer interfaces are critical strategies to minimize the recombination losses and improve the power conversion efficiency (PCE) in perovskite solar cells (PSCs). Herein, we use titanium carbide MXene (Ti3C2T x ) to tailor the electronic properties of the electron transport layer (ETL) and ETL/perovskite interface in inverted (p–i–n) PSCs and correlate them to the observed PCE. MXene doping in a [6,6]-phenyl-C61-butyric acid methyl ester (M-PC61BM)-based ETL results in an improved electrical conductivity and ETL/perovskite interface band alignment. A red shift in the Ag(2) peak in the Raman spectrum and a localized upshift of the Fermi level calculated using scanning Kelvin probe force microscopy (SKPFM) confirm the n-doping of PC61BM. Consequently, PSC devices with M-PC61BM as the ETL show a higher PCE of 18% than PC61BM ETL-based control devices (PCE = 15.2%). Importantly, our study proves that the improvement in the open-circuit voltage (V OC) and fill factor (FF) depends on how MXene is integrated into the PSC, i.e., as a dopant in the PC61BM ETL, an interfacial layer between the perovskite and ETL, or a standalone ETL. Through comprehensive photoluminescence, electrochemical impedance spectroscopy, space-charge limited current, and scanning Kelvin probe force microscopy-based analyses, we establish that the introduction of MXene in PSCs has multiple benefits, including improvement in carrier transport, passivation and trap state reduction, and better interfacial energy alignment. Further, we unravel the most prominent factor influencing device performance in each mode of MXene introduction. Hence, the study reinforces the potential of Ti3C2T x MXene as a versatile material for high-performance electronic and optoelectronic devices.

Electron transport bilayer with cascade energy alignment based on Nb2O5-Ti3C2 MXene/TiO2 for efficient perovskite solar cells

MXene-Based Tailoring of Carrier Dynamics, Defect Passivation, and Interfacial Band Alignment for Efficient Planar p–i–n Perovskite Solar Cells

Oxide Derivatives of Nb2CTx MXene and Their Application as Electron Transport Layers in Perovskite Solar Cells: Unraveling the Oxidation Process and Functionalization

Ti3C2 MXene nanosheets modified TiO2 ETLs enables efficient solar cells with outstanding device consistency

Nb2C MXenes modified SnO2 as high quality electron transfer layer for efficient and stability perovskite solar cells

MXene-Embedded PEDOT:PSS Hole-Transport Material for Lead-Free Perovskite Solar Cells

Plasma Oxidized Ti3C2Tx MXene As Electron Transport Layer for Efficient Perovskite Solar Cells

Fabrication of TiO2/MXene Nanohybrid Electron Transport Layer by Artist Spray Gun Assisted Pyrolysis Method for Efficient Carbon Perovskite Solar Cell

Performance simulation of the perovskite solar cells with Ti3C2 MXene in the SnO2 electron transport layer

MXenes as a hole transport interfacial layer for efficient and air-stable quasi-2D perovskite solar cells

Hybridization of SnO 2 and an In-Situ-Oxidized Ti 3 C 2 T x MXene Electron Transport Bilayer for High-Performance Planar Perovskite Solar Cells

SnO2-Ti3C2 Blends As Electron Transport Layer for Efficient and Easily Fabricated Planar Perovskite Solar Cells

Laser Derived Electron Transport Layers with Embedded p‐n Heterointerfaces Enabling Planar Perovskite Solar Cells with Efficiency over 25%

Atomic Layer Deposition of an Effective Interface Layer of TiN for Efficient and Hysteresis-Free Mesoscopic Perovskite Solar Cells

Niobium-Carbide MXene Modified Hybrid Hole Transport Layer Enabling High-Performance Organic Solar Cells Over 19

Room-Temperature Processed Nb2O5 As the Electron-Transporting Layer for Efficient Planar Perovskite Solar Cells

Interfacial Engineering of Au@Nb2CTx-MXene Modulates the Growth Strain, Suppresses the Auger Recombination, and Enables an Open-Circuit Voltage of over 1.2 V in Perovskite Solar Cells

Mesoporous structured MoS2 as an electron transport layer for efficient and stable perovskite solar cells

Mesoporous structured MoS 2 as an electron transport layer for efficient and stable perovskite solar cells

In Situ-Formed and Low-Temperature-Deposited Nb:TiO 2 Compact-Mesoporous Layer for Hysteresis-Less Perovskite Solar Cells with High Performance

Designing nanobowl arrays of mesoporous TiO2 as an alternative electron transporting layer for carbon cathode-based perovskite solar cells.