Abstract:One convenient approach to minimize the surface recombination loss in Si is to passivate the surface dangling bonds by depositing a thin TiO 2 layer on the bulk Si. Besides, the p -Si/TiO 2 interface can initiate hole-blocking and facilitate efficient electron transport through the TiO 2 layer; thereby, promoting the extraction of electrons for efficient onward utilization. In this context, the current investigation involves studying how the Ti 3+ donor states, produced by deliberately introducing O-vacancies controlled by changing the plasma pressure in the RF-magnetron sputtering chamber during the growth of the TiO 2 thin films, can change the material's Fermi level and work function and modify the band bending and band offset as well as the fixed oxide charge density in the p -Si/TiO 2 heterojunction interface. The TiO 2 / p -Si interface has been studied through capacitance-voltage (C-V) analysis to determine the interface parameters such as fixed oxide charge, the density of interface traps, and the dielectric constant of TiO 2 . The studied hole-blocking property of the interface has been correlated to the photoresponsivity of the metal-oxide-semiconductor (MOS) structure. The MOS device fabricated at a pressure of 30 mTorr displays a large saturation current (15.95 μA cm –2 ) when subjected to a positive gate bias, facilitated by the relatively low conduction band offset (ΔE C ∼0.20 eV), significant positive fixed oxide charge (+1.18 ×10 11 cm –2 ) and the interface trap density (1.03 ×10 12 cm –2 ), which enhanced the transport of minority carrier electrons from the p -Si to the metal, resulting in a good photo responsivity ∼0.158 AW –1 and photo gain of ∼37.5 under white light illumination. Optimum hole-blocking and surface passivation characteristics of the TiO 2 / p -Si interface together may facilitate fabricating improved heterojunction Si solar cells.

Self-Assembly Monolayer Impact on Schottky Diode Electrical Properties

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Effective Schottky Barrier Height Lowering By TiN Capping Layer For TiSix/Si Power Diode

Controlling Leakage Currents: The Role Of The Binding Group And Purity Of The Precursors For Self-Assembled Monolayers In The Performance Of Molecular Diodes

Improving the barrier inhomogeneity of 4H-SiC Schottky diodes by inserting Al2O3 interface layer

Effect of amorphous SiC layer on electrical and optical properties of Al/a-SiC/c-Si Schottky diode for optoelectronic applications

Contactless analysis of surface passivation and charge transfer at TiO 2 –Si interface

Modification of barrier height inhomogeneity in the presence of titanium dioxide nanoparticles on Carmoisine dye-based Schottky device

Schottky barrier height lowering induced by CoSi 2 nanostructure

Fabrication and Characterization of Oxygenated AlN/4H-SiC Heterojunction Diodes

Analysis of the optical and electronic characteristics of Al/NiPc complex/p-Si diode

Interfacial engineering by using self-assembled monolayer in mesoporous perovskite solar cell

Performance of Schottky diode of structured FTO/TiO 2 /Al employing hydrogen fluoride treated TiO 2 : Qualitative and quantitative analysis

Influence Of Trench Oxide On Schottky Barrier Height For Tisix/Si Power Diode

Electrical Characterization of MIS Schottky Barrier Diodes Based on Nanostructured Porous Silicon and Silver Nanoparticles with Applications in Solar Cells

The impact of sputtering pressure on the TiO 2 / p -Si interface and its implications for hole-blocking and photodetection

Electrical Properties of Laser Patterned Schottky Diode with ALD-Grown TiO 2 Interlayer

Enhancing the Photovoltaic Performance of GaAs/graphene Schottky Junction Solar Cells by Interfacial Modification with Self Assembled Alkyl Thiol Monolayer

A comparison electrical characteristics of the Au/(pure-PVA)/n-Si and Au/(CdTe doped-PVA)/n-Si (MPS) type Schottky structures using I–V and C–V measurements

Design of a simple bifunctional system as a self-assembled monolayer (SAM) for inverted tin-based perovskite solar cells

Indium Tin Oxide Anode Self-Assembled Monolayer Modification for Device Performance Improvement of Organic Light-Emitting Diodes