Abstract:Regulating hole injection via self-assembled monolayers (SAMs) modification on indium tin oxide (ITO) is significantly favourable for achieving high efficiency and stability of organic light-emitting diodes (OLEDs). In this work, ITO was modified by pentafluorobenzylphosphonic acid (F5BnPA) and heneicosafluorododecylphosphonic acid (HF21DPA) in a binary SAMs way. By altering mole ratios of these two materials, ITO work function can be achieved from 5.20 to 5.82 eV and the roles of F5BnPA and HF21DPA in affecting hole injection and device performances were also explored. The results demonstrate a synergistic effect that HF21DPA improves ITO work function efficiently for its fluorinated alkyl chain and F5BnPA enhances the charge transfer directly due to its aromatic group gathering HOMO level. When α-naphthylphenylbiphenyldiamine (NPB) and 4,4′,4″-tris(carbazol-9-yl) triphenylamine (TCTA) were used as hole transport layers (HTLs) in OLEDs with a structure of ITO/SAM/HTL/tris(8-hydroxyquinolino) aluminum (III) (Alq3)/lithium fluoride (LiF)/Al, brightness up to 36839 and 58189 cd/m2 and current efficiency up to 5.75 and 7.35 cd/A were obtained, respectively. Furthermore, the influence of binary SAMs on the stability of NPB-based OLEDs was studied. The maximum half-lifetime at the initial brightness of 2200 cd/m2 reaches 368.0 h, which is 75.1 times that of the poly(3, 4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-containing device. The high durability is attributed to higher hydrophobicity and lower hole injection barrier caused by SAMs. This is the first report on the synergistic effect of aromatic and aliphatic compounds in binary SAMs on regulating hole injection, showing a new approach of obtaining high efficiency and stability of OLEDs.

Indium Tin Oxide Anode Self-Assembled Monolayer Modification for Device Performance Improvement of Organic Light-Emitting Diodes

Modification of ITO Anodes with Self-Assembled Monolayers for Enhancing Hole Injection in OLEDs

Self-assembled Monolayer-Modified ITO for Efficient Organic Light-Emitting Diodes: the Impact of Different Self-Assemble Monolayers on Interfacial and Electroluminescent Properties

Enhancement Performance of Organic Light‐Emitting Diodes Through Self‐Assembled Monolayer‐Modified ITO Anode

Enhanced efficiency and stability of organic light-emitting diodes via binary self-assembled monolayers of aromatic and aliphatic compounds on indium tin oxide

Influence of Surface Modification of IndiumTin Oxide on Performance of Organic Light Emitting Diodes

Systematic Investigation of Surface Modification by Organosiloxane Self-Assembled on Indium-Tin Oxide for Improved Hole Injection in Organic Light-Emitting Diodes

Influence of ITO Surface Treatment on Performance of Organic Light-Emitting Devices

Surface Modification and Characterization of Indium–tin Oxide for Organic Light-Emitting Devices

Tuning Hole-Injection in Organic-Light Emitting Diodes with Self-Assembled Monolayers

Enhanced Performance by Inserting Ultrathin SiO2 Layer in Organic Light‐emitting Devices

Sulfuric Acid Treatment Of Indium Tin Oxide For Application Of Organic Light-Emitting Diodes

Self‐assembled Electroactive Phosphonic Acids on ITO: Maximizing Hole‐Injection in Polymer Light‐Emitting Diodes

Improved Performances for Organic Light-Emitting Diodes Based on Al2o3-Treated Indium-Tin Oxide Anode

Electrochemical Treatment of ITO Surface for Performance Improvement of Organic Light-Emitting Diode

Improving the Performance of OLED Using Indium Tin Oxide Treated by Nickel Salt Solution

Anode Modification for Single-layer Organic Light-emitting Devices

Enhanced Hole-Injection Property in an OLED with a Self-assembled Monolayer of Hole-Transporting TPD on Thin Au As the Anode

Modification of the Electrodes of Organic Light-Emitting Devices Using the Sno2 Ultrathin Layer

Phthalocyanine Monolayer-Modified Gold Substrates as Efficient Anodes for Organic Light-Emitting Diodes

Improvement of organic light-emitting diodes performance by the insertion of a Si3N4 layer