Abstract:To enhance the efficiency of cathode electron injection of organic light-emitting diode (OLEDs), we designed a new hybrid modified layer (HML) with the structure of Bphen: LiF/Al/MoO3, which was applied to ITO/NPB/Alq(3)/Al. The traditional material LiF is used for the electron injection layer of the reference device. The results show that using HBL at the interface between organic and cathode is very effective. We have measured the electroluminescence (EL) spectra of the device. The EL peak of the device is 534 nm, which indicates that it is from Alga. It can be seen that the structure design of the multilayer modified layer does not change the luminescence spectrum of the device. Bright green emission can be obtained from the optimized EL devices. Compared with traditional device based on LiF, the performance of the single unit with hybrid modification layer has better luminous properties and efficiency. Present research work shows that when the optimum parameter of the hybrid layer is Bphen LiF(5 nm; 6%)/Al(1nm)/MoO3(5 nm), the maximum current efficiency and the maximum power efficiency of the device are 4. 28 cd.A(-1) and 2. 19 lm.W-1, respectively, which are 25. 5% and 23. 7% higher than those of the reference device. Current-voltage characteristics demonstrate that the hybrid interfacial layer can promote electron injection, thus increasing the current efficiency and reduced their operating voltage slightly of OLED. We systematically analyze the improvement of device performance from two aspects. On the one hand, LiF can fill the electron trap of Bphen to enhance the current injection, moreover, HML can also block hole transport and reduce the hole current. On the other hand, based on charge balance factor theory, HML enhances the injection of electrons and increases the charge balance factor, which improves the balance of carriers in the device. The experimental results show that the cathode hybrid layer can improve the performance of the device.

Enhanced efficiency and stability of organic light-emitting diodes via binary self-assembled monolayers of aromatic and aliphatic compounds on indium tin oxide

Enhancement Performance of Organic Light‐Emitting Diodes Through Self‐Assembled Monolayer‐Modified ITO Anode

Indium Tin Oxide Anode Self-Assembled Monolayer Modification for Device Performance Improvement of Organic Light-Emitting Diodes

The Origin Of The Improved Efficiency And Stability Of Triphenylamine-Substituted Anthracene Derivatives For Oleds: A Theoretical Investigation

Self‐assembled Electroactive Phosphonic Acids on ITO: Maximizing Hole‐Injection in Polymer Light‐Emitting Diodes

Improved Thermally Activated Delayed Fluorescence-Based Electroluminescent Devices Using Vacuum-Processed Carbazole-Based Self-Assembled Monolayers

Highly efficient hole injection/transport layer-free OLEDs based on self-assembled monolayer modified ITO by solution-process

Phthalocyanine Monolayer-Modified Gold Substrates as Efficient Anodes for Organic Light-Emitting Diodes

The Role of Self‐Assembled Monolayers in the Performance‐Stability Trade‐Off in Organic Solar Cells

Improved Performance with a Hybrid Cathodic Interfacial Layer in OLEDs

Tuning Hole-Injection in Organic-Light Emitting Diodes with Self-Assembled Monolayers

OLED application of π-conjugated phenylimino carboxylic acid organic semiconductor material

Stable Amorphous Bis(diarylamino)biphenyl Derivatives As Hole-Transporting Materials in OLEDs

Phenanthroimidazole-derivative Semiconductors As Functional Layer in High Performance OLEDs

Tailoring Self‐Assembled Monolayers for High‐Performance Polymer Solar Cells with Improved Stability

Sulfuric Acid Treatment Of Indium Tin Oxide For Application Of Organic Light-Emitting Diodes

Organic light-emitting diodes with improved hole–electron balance and tunable light emission with aromatic diamine/bathocuproine multiple hole-trapping-layer

Operational stability enhancement in organic light-emitting diodes with ultrathin Liq interlayers

Enhanced Brightness and Efficiency in Organic Light-Emitting Devices Using an Lif-Doped Electron-Injecting Layer with Aluminium Cathode

Enhanced Performance by Inserting Ultrathin SiO2 Layer in Organic Light‐emitting Devices

The role of molybdenum oxide as anode interfacial modification in the improvement of efficiency and stability in organic light-emitting diodes