Abstract:High hardness is desirable for thermal insulation materials in various applications to improve wear resistance. However, hard materials like diamond, Si3N4, and SiC are often accompanied by high thermal conductivity, due to their strong covalent bonds and high Young's modulus, which increase sound velocity and benefit heat transportation. How to achieve concurrent high hardness and low thermal conductivity remains a challenge in thermal insulation materials. In this work, we report (Yb+Ca) co-doped alpha-SiAlON (Yb0.5Ca0.75Si7.5Al4.5O1.5N14.5, a solid solution of alpha-Si3N4) with a low thermal conductivity of 3.4 W/(mK) and a hardness of 18.1 GPa at 25degree celsius. The thermal conductivity of alpha-SiAlONs co-doped by (Yb+Nd/Lu) were also studied, and we found that phonon scattering could be significantly increased only when there was a remarkable difference in cation mass and radius between the co-doping cations, like that between Yb3+ and Ca2+. Additionally, high-entropy alpha-SiAlONs co-doped by five kinds of cations were studied (e.g., Nd(0.1)Gd(0.1)Dy0.1Er(0.1)Yb(0.1)Si(9).5Al2.5ON15), and we found that the high-entropy strategy is not so effective in pursuing low thermal conductivity in alpha-SiAlONs. The contribution of different phonon scattering mechanisms in the alpha-SiAlONs was discussed based on inverse thermal diffusivity. Compared with most other ceramics (e.g., 8YSZ and rare-metal zirconates) with low thermal conductivity, (Yb+Ca) co-doped alpha-SiAlON has a lower bulk density, higher hardness, and higher toughness, which makes it a potential candidate material for applications requiring both thermal insulation and good mechanical properties.

Thermal conductivity of Ca α‐SiAlON ceramics with varying m and n values

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Influence of Stabilizing Ions and Sintering Process on the Thermal Conductivity of Α‐sialon Ceramics

Effects of AlN Content and Sintering Atmospheres on the Thermal Conductivity of Hot-Pressed SiC Ceramics

Conductivity Properties of Β-Sialon Ceramics

Yb0.5Ca0.75Si7.5Al4.5O1.5N14.5 α-SiAlON ceramics: a hard material with low thermal conductivity

Rattling effect in YbaCabSi7.5Al4.5O1.5N14.5 α‐SiAlON ceramics

Yb0.5Ca0.75Si7.5Al4.5O1 .5N14.5 Α-Sialon Ceramics: A Hard Material with Low Thermal Conductivity

Investigation on Mechanical Properties of AlON Ceramics Synthesized by Spark Plasma Sintering

Thermal conductivity and dielectric property of hot-pressing sintered AlN–BN ceramic composites

Thermal Conductivity of AlN Ceramics Sintered with CaF2 and YF3

Compositional tailoring effect on crystal structure, mechanical and thermal properties of γ-AlON transparent ceramics

Enhanced thermal insulation and mechanical properties of Y-α-SiAlON porous ceramics with Sr doping

Microstructure and thermal conductivity of aluminium nitride with (CaY)F3 as the sintering aid

Study On Thermal Conductivity Of Sps-Sintered Si3n4 Ceramics After Heat-Treatment

Study on Thermal Conductivity of Spark-Plasma-Sintered Silicon Nitride Ceramics

A Quantitative Study on the Interaction Between Silicon Content and Heat Treatment on Thermal Conductivity of Al-Si Binary Alloys

Study on Thermal Conductivity of SPS-Sintered Si<sub>3</sub>N<sub>4</sub> Ceramics after Heat-Treatment

Local thermal conductivity of polycrystalline AlN ceramics measured by scanning thermal microscopy and complementary scanning electron microscopy techniques

Effects of MgSiN2 Addition and Post-Annealing on Mechanical and Thermal Properties of Si3N4 Ceramics