Abstract:The first-generation semiconductor materials represented by silicon (Si) and germanium (Ge) still hold a dominant position in many fields, including micro-electromechanical systems (MEMS) and integrated circuits (ICs). The processing of these materials continues to attract significant research attention for improvements in quality and efficiency. This study proposes a novel hybrid laser-enhanced particle-laden electrochemical machining (LEPL-ECM) process, whereby pulsed laser irradiation is utilized to selectively and locally enhance the electrical conductivity of Ge at specific locations. A neutral electrolyte jet, containing abrasive diamond particles, is applied to the location on the wafer surface opposite the laser irradiation, facilitating a localized and enhanced electrochemical dissolution. The effect of micro-particle erosion effectively removes the generated oxides and potential passivation layers, ensuring continuous and efficient electrochemical reactions. Consequently, high-quality micro-dimples with an entrance diameter of about 380-800 μm, a depth of around 138-300 μm, and a quasi-mirror surface with the roughness (Sa) of as low as 59.8 nm can be achieved within 90 seconds. Furthermore, the effects of the applied voltage, laser power and processing time on the resulting dimple characteristics and surface quality are discussed, along with a detailed morphology characterization. Dense micro-pits, radial streamlined micro-grooves and a special transitional region have been observed on dimple center, sidewall and near the edge, respectively, and the formation mechanism have been analyzed. Finally, a simulation of the electrolyte jet induced fluid pressure and velocity as well as the particle trajectory and distributions within and surrounding the dimple structure was conducted, which reveals that the synergistic mechanism associated with the hybrid material removal process involves both electrochemical corrosion and abrasive erosion.

Pulse Potential Confined Electrochemical Polishing on Gallium Arsenide Wafer

A reproducible electropolishing technique to customize tungsten SPM probe: From mathematical modeling to realization

An Efficient Electrochemical Polishing Method with Planarization Ability Employing Solid and Liquid Electrolytes

An efficient electrochemical polishing of tungsten with combined forced and natural convections

Pulse electrochemical meso/micro/nano ultraprecision machining technology

A comprehensive study on electrochemical polishing of tungsten

Systematic Study of Electropolishing Technique for Improving the Quality and Production Reproducibility of Tungsten STM Probe

Effects of grinding-induced surface topography on the material removal mechanism of silicon chemical mechanical polishing

Material Removal and Surface Modification of Copper under Ultrasonic-Assisted Electrochemical Polishing

Research on the surface characteristics of 42CrMo alloy steel pulse electrochemical machining

Charge Utilization Efficiency and Side Reactions in the Electrochemical Mechanical Polishing of 4H-SiC (0001)

High efficiency polishing of silicon carbide by applying reactive non-aqueous fluids to fixed abrasive pads

Mechanisms and characterization of a novel hybrid laser-enhanced particle laden electrochemical fabrication process for high quality micro-dimples on germanium wafers

Giant electro-rheological polishing of inner walls of narrow groove for Ge semiconductor material by array wire electrodes

A study on quartz wafer slot polishing by using the ultrasonic-assisted wire electrophoretic deposition method

Chemical Etching Processes at the Dynamic GaAs/Electrolyte Interface in the Electrochemical Direct-Writing Micromachining

Angstrom surface on copper induced by novel green chemical mechanical polishing using ceria and silica composite abrasives

Photoelectric effect accelerated electrochemical corrosion and nanoimprint processes on gallium arsenide wafers

Investigation on Electrical Enhanced Photocatalysis Polishing of Single-Crystal Silicon Carbide Substrates

Electrochemical polishing of microfluidic moulds made of tungsten using a bi-layer electrolyte

Photoelectric e ﬀ ect accelerated electrochemical corrosion and nanoimprint processes on gallium arsenide wafers