Abstract:INTRODUCTION Gallium nitride (GaN) is of particular interest due to its direct wide band gap energy (3.4 eV), high breakdown field, high electron saturation velocity and outstanding physicochemical properties [1-2]. For device applications, a GaN film is generally prepared by metal organic chemical vapor deposition (MOCVD) on sapphire substrates. However, in these heteroepitaxial GaN layers, the lattice and thermal mismatch between GaN and sapphire leads to a large number of dislocations [3]. As a result, flat, clean and undamaged surface is essential to form homo-epitaxial GaN layers with a low dislocation density [4]. However, GaN is very difficult to achieve an ideal polishing efficiency because of its high hardness and stable chemical properties [5]. Mechanical polishing with hard abrasives such as diamond and alumina particles can achieve flatness rapidly, but it can introduce scratch damages [6]. Wet etching can planarize GaN surface without damage by using photo electrochemical treatment, hot phosphoric acid, and molten KOH [7], but it produces rough surface. An etching method, which termed catalyst-referred etching (CARE) has been reported to produce an atomically flat damagefree surface of GaN [8], but the removal rate was just 3.4-3.8 nm/h [5]. Chemical-mechanical polishing (CMP) is considered to be an effective method to realize atomic-level smooth and damages free surface of materials. The studies of Hayashi et al.[9] suggested the importance of the selection of abrasive particles and led to the conclusion that abrasive should be softer than GaN to suppress the introduction of sub-surface damage layers. Colloidal silica based slurry is one of the possible candidates to achieve a damage free surface with a true CMP process as colloidal silica is much softer than GaN [10]. Hideo Aida et al. [11] reported the CMP process of gallium face of GaN with colloidal silica based slurry. In their studies, there were a lot of scratches generated during polishing process, which under the condition of abrasive particle size and concentration of 40nm and 40% respectively. It took him about 150 h to obtain damage-free surface. In our previous published work, we got damage-free surface within 9 h by using Al2O3 and colloidal silica slurry respectively [12]. The purpose of this work is to make clear of the principal influence factors in scratches on the surface of GaN during CMP process, to fulfill controllable and optimization CMP process, and provide a reference basis for the material removal mechanism of GaN.

Giant electro-rheological polishing of inner walls of narrow groove for Ge semiconductor material by array wire electrodes

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

Model modification and influence of edge effect on effective area of giant electro-rheological polishing using plate electrodes

Mechanisms and characterization of a novel hybrid laser-enhanced particle laden electrochemical fabrication process for high quality micro-dimples on germanium wafers

Pulse Potential Confined Electrochemical Polishing on Gallium Arsenide Wafer

A Systematic Study on Dry Etching Process of Germanium for Ge 3D-Fets Applications

High-quality germanium growth on (111)-faceted V-groove silicon by molecular beam epitaxy

Controllable electrochemical-magnetorheological finishing of single-crystal gallium nitride wafers

Localized and efficient machining of germanium based on the auto-coupling between picosecond laser irradiation and electrochemical dissolution: Mechanism validation and surface characterization

A synergistic polishing technology by mixed abrasives with photocatalysis and fenton reaction

Investigation on Electrical Enhanced Photocatalysis Polishing of Single-Crystal Silicon Carbide Substrates

High efficiency polishing of micro-structured NiP alloy using isotropic electrochemical etching for achieving sub-nanometer roughness

Electrochemical mechanical polishing of 4H-SiC (0001) with different grinding stones

Subsurface damage and brittle fracture suppression of monocrystalline germanium in ultra-precision machining by multiple ion implantation surface modification

A study on quartz wafer slot polishing by using the ultrasonic-assisted wire electrophoretic deposition method

Chemical–mechanical polishing for giant magnetoresistance device integration

Atomic surface induced by novel green chemical mechanical polishing for aspheric thin-walled crucibles with large diameters

Ductile deformation and subsurface damage evolution mechanism of silicon wafer induced by ultra-precision grinding process

Effect of Anisotropically-etched Silicon Electrode on Electrolytic Products Flow in Micro ECM

Analysis of scratches generated on gan substrates during polishing

The generation mechanism and suppression method of the "comet tail" defect on the single-crystal silicon surface polishing with magnetorheological