Abstract:INTRODUCTION Gallium nitride (GaN) is of particular interest due to its direct wide band gap energy (3.4 eV), high breakdown field, high electron saturation velocity and outstanding physicochemical properties [1-2]. For device applications, a GaN film is generally prepared by metal organic chemical vapor deposition (MOCVD) on sapphire substrates. However, in these heteroepitaxial GaN layers, the lattice and thermal mismatch between GaN and sapphire leads to a large number of dislocations [3]. As a result, flat, clean and undamaged surface is essential to form homo-epitaxial GaN layers with a low dislocation density [4]. However, GaN is very difficult to achieve an ideal polishing efficiency because of its high hardness and stable chemical properties [5]. Mechanical polishing with hard abrasives such as diamond and alumina particles can achieve flatness rapidly, but it can introduce scratch damages [6]. Wet etching can planarize GaN surface without damage by using photo electrochemical treatment, hot phosphoric acid, and molten KOH [7], but it produces rough surface. An etching method, which termed catalyst-referred etching (CARE) has been reported to produce an atomically flat damagefree surface of GaN [8], but the removal rate was just 3.4-3.8 nm/h [5]. Chemical-mechanical polishing (CMP) is considered to be an effective method to realize atomic-level smooth and damages free surface of materials. The studies of Hayashi et al.[9] suggested the importance of the selection of abrasive particles and led to the conclusion that abrasive should be softer than GaN to suppress the introduction of sub-surface damage layers. Colloidal silica based slurry is one of the possible candidates to achieve a damage free surface with a true CMP process as colloidal silica is much softer than GaN [10]. Hideo Aida et al. [11] reported the CMP process of gallium face of GaN with colloidal silica based slurry. In their studies, there were a lot of scratches generated during polishing process, which under the condition of abrasive particle size and concentration of 40nm and 40% respectively. It took him about 150 h to obtain damage-free surface. In our previous published work, we got damage-free surface within 9 h by using Al2O3 and colloidal silica slurry respectively [12]. The purpose of this work is to make clear of the principal influence factors in scratches on the surface of GaN during CMP process, to fulfill controllable and optimization CMP process, and provide a reference basis for the material removal mechanism of GaN.

Controllable electrochemical-magnetorheological finishing of single-crystal gallium nitride wafers

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

Incined Magnetorheological Finishing and Its Path Controlling

Electrochemical magnetorheological finishing for hard-to-machine functional materials with nanometer-scaled surface roughness

Enhancement Mechanism of Chemical Mechanical Polishing for GaN Based on Electro-Fenton Reaction

High-Efficiency Chemical-Mechanical Magnetorheological Finishing for Ultra-Smooth Single-Crystal Silicon

Surface Roughness and Material-Removal Rate with Magnetorheological Finishing Without Subsurface Damage of the Surface

Magnetorheological Finishing for MgF2 Crystal Processed under High Temperature and High Pressure

A combination process of magnetorheological finishing and computer controlled optical surfacing on single-crystal silicon surface

Chemical–mechanical polishing for giant magnetoresistance device integration

In-situ Investigation into the Atomic-Scale Removal Behavior of Gallium Nitride

Atomically smooth gallium nitride surfaces generated by chemical mechanical polishing with non-noble metal catalyst(Fe-Nx/C) in acid solution

A synergistic polishing technology by mixed abrasives with photocatalysis and fenton reaction

Research on the material removal mechanism of vibration-assisted nano-scratch on single-crystal GaN by molecular dynamics

Optimizing Parameters for Magnetorheological Finishing Supersmooth Surface

Enhanced machinability of aluminium-based silicon carbide by non-resonant vibration-assisted magnetorheological finishing

Chemical Mechanical Polishing of Freestanding GaN Substrates

Analysis of scratches generated on gan substrates during polishing

Magnetorheological Finishing Technology for Polishing Super-Smooth Optical Surfaces

Key Technology Research on Magnetorheological Finishing Based on Suppression of Surface Mid-Spatial Frequency Ripple Errors

Sulfuric acid modified magnetorheological finishing of polycrystalline magnesium aluminate spinel