Abstract:Electrochemical polishing finds wide application across various industries, including manufacturing, biomedicine, and semiconductors. However, this technology requires substantial water usage and results in environmental pollution due to the generation of waste electrolytes containing highly corrosive acids and heavy metal ions. Herein, we propose an electrochemical polishing method (SDEP) that employs solid dielectrics consisting of macroreticular ion exchange resin (MIER) solid particles and phosphoric acid electrolyte as an alternative to traditional liquid conductive media. Maintaining a polishing current of 0.4–0.5 A requires only an electrolyte consumption of 10–20 mL/h, leading to a more than 65% reduction in electrolyte usage compared to liquid electrochemical polishing. Meanwhile, this method can be applied to polish additively manufactured metal parts with an initial roughness Ra>10 μm. The achievable surface finish features Ra = 0.778 ± 0.078 μm, Rq = 0.960 ± 0.121 μm, and Rz = 4.175 ± 1.111 μm after 1-h polishing, with a material removal rate of 0.15–0.19 mm 3 /min. The improvement of Ra, Rq, and Rz are 92.3%, 92.1%, and 92.0%, respectively. With the EDS and XPS analysis, rod-shaped by-products adhering to the surface of MIER particles generated during the SDEP process are confirmed as Fe 3+ , PO 4 3− , and PO 3 − . Furthermore, the MIER particles can be reused after cleaning, exhibiting polishing performance comparable to fresh MIER. This method reduces the use of electrolytes at the source of electropolishing, and MIER particles can be recycled, pointing towards the development of eco-friendly electrochemical polishing.

An Efficient Electrochemical Polishing Method with Planarization Ability Employing Solid and Liquid Electrolytes

Analysis of the Polishing Ability of Electrogenerated Chemical Polishing

Electrochemical polishing with glycol-based electrolyte of the curved internal channels fabricated via laser powder bed fusion

Principles and Applications of Electrochemical Polishing

Electrogenerated chemical polishing method

Efficient solid dielectric electrochemical polishing with minimal electrolyte consumption and reusable conductive media

Machining Characteristics of Electrochemical Polishing Using Ultrasonic Vibration for Nanoscale High Surface Quality.

Electrochemical Polishing of Tungsten: An Investigation of Critical Spatial Frequency and Ultimate Roughness

A new polishing method for complex structural parts: moist particle electrolyte electrochemical mechanical polishing (MPE-ECMP)

Preparation of Flat and Smooth Copper Surface by Jet Electrochemical Machining and Electrochemical Polishing

Electrogenerated Chemical Polishing of Copper

Material Removal and Surface Modification of Copper under Ultrasonic-Assisted Electrochemical Polishing

Investigation of Agitation Effects in Dry Electrochemical Polishing via Machining Characterization Using Single Solid Electrolyte Particles

Electrochemical Mechanical Polishing of Copper with High Permittivity Abrasives

Experimental study on ultrasonic-assisted electrolyte plasma polishing of SUS304 stainless steel

Investigation on the Dry-Type Electrochemical Polishing of 304 Stainless Steel with Ion-Exchange Resin Particles

Solid Dielectric Electrochemical Polishing of 3D-Printed Parts: Performance and Mechanisms

Electrochemical Polishing of Lithium Metal Surface for Highly Demanding Solid-Electrolyte Interphase

Two-Steps Electrochemical Polishing of Laser Powder Bed Fusion 316L Stainless Steel

Optimization of electrolytic plasma polishing process and surface performance analysis for 6061 aluminum alloy

Pulse Potential Confined Electrochemical Polishing on Gallium Arsenide Wafer