Abstract:Electrothermal actuators are highly advantageous for microelectromechanical systems (MEMS) due to their capability to generate significant force and large displacements. Despite these benefits, their application in reconfigurable conduction line switches is limited, particularly when employing commercial processes. In DC MEMS switches, electrothermal actuators require electrical insulation between the biasing voltage and the transmission line to prevent interference and maintain the integrity of the switch. This work presents a chevron-type electrothermal actuator utilizing a stack of Al thin films on a silicon (Si) structural layer beam to create a DC MEMS switch. The design leverages a thin film Al heater to drive the actuator while the layer provides electrical insulation, suppressing crosstalk with the Si layer. The electrical contact resistance of a Si-to-Si interface was evaluated by applying a controlled current and measuring the resultant voltage. A low contact resistance of 150 Ω was achieved when an initial contact gap of 2.52 μm was closed using an actuator with an actuation voltage of 1.2 V and a current of 205 mA, with a switching speed of less than 5 ms. Factors such as the contact force, the temperature, and the residual device layer etching angle significantly impact the Si-to-Si contact resistance and the switch's longevity. The switch withstands a breakdown voltage up to 350 V at its terminal contacts. Thus, it will be robust to self-actuation caused by unwanted voltage contributions, making it suitable for high-voltage and harsh environment applications.

A New Four States High Deflection Low Actuation Voltage Electrostatic Mems Switch for RF Applications

Design and Experimental Validation of A Restoring Force Enhanced Rf Mems Capacitive Switch with Stiction-Recovery Electrodes

SP4T RF MEMS Switch with Low Actuation Voltage

Electro-thermally actuated RF MEMS switch for wireless communication.

A Low-Voltage Lateral MEMS Switch with High RF Performance

Electrostatic Comb-Drive Actuator for Mems Relays/Switches with Double-Tilt Comb Fingers and Tilted Parallelogram Beams

Design, optimization and simulation of a low-voltage shunt capacitive RF-MEMS switch

Design and Fabrication of a Low Insertion Loss Capacitive RF MEMS Switch with Novel Micro-Structures for Actuation

Experimental analysis of a low controlling voltage tri-electrode MEMS electrostatic actuator for array applications

Mechanical Model of Low Actuation Voltage RF MEMS Switches

Low Voltage, High Speed and Small Area In-Plane MEMS Switch

Design and Analysis of a Lateral Lateral DC-Contact MEMS RF Switch with High Performance

Design and simulation of a novel electro-thermally actuated lateral RF MEMS latching switch for low power applications

Tri-electrode MEMS electrostatic actuator with lower control voltage and higher stroke for actuator array implementations

Design of Broadband High-Frequency Multi-Throw RF-MEMS Switches

An Analytical Model for High Performance Capacitive RF MEMS Switch Design

Laterally Actuated Si-to-Si DC MEMS Switch for Power Switching Applications

Design and fabrication of X-band capacitive MEMS switches

Novel Multicontact Radio Frequency Microelectromechanical System Switch in High-Power–handling Applications

A Zero Static Power Consumption Bi-Stable RF MEMS Switch Based on Inertial Generated Timing Sequence Method

Rf Mems Switch and Its Applications