Abstract:Abstract Titanium alloys have a high strength-to-weight ratio, fatigue performance and excellent corrosion resistance, and therefore are widely used in the aerospace sector due to their ability to withstand severe mechanical and thermal stresses in service. There are numerous cases where it would be desirable to use different titanium alloys in defined subcomponent regions to improve performance and efficiency. Conventional processing routes do not permit components to be produced with multiple titanium alloys and thus, design efficiency and optimization of component properties is compromised or over-engineered. In this study, a hybrid solid-state consolidation route is presented whereby field assisted sintering technology (FAST) is exploited to diffusion bond (DB) dissimilar titanium alloy powders in defined regions—a process termed FAST-DB. Titanium alloy powders Ti-6Al-4V (Ti-64) and Ti-6Al-2Sn-4Zr-2Mo (Ti-6242) were bonded using FAST in order to study the tensile deformation behavior and strain localization across a dissimilar alloy solid-state bond. FAST-DB was carried out at the sub- and super- beta transus temperatures of both alloys to generate dissimilar microstructure morphologies across the bond. In all cases, diffusion bonds showed excellent structural integrity with no defects and a smooth hardness profile across the bond. The deformation characteristics of the bonds was studied using two different tensile test approaches. The first approach used ASTM standard specimens to measure the mechanical properties of FAST-DB samples and study the location of the tensile failure. The second approach used a microtester and optical Digital Image Correlation to capture the grain interaction in the bond region under tensile loading. The work demonstrated that the diffusion bond remains intact and that tensile failure occurs in Ti-64 (i.e. the lower strength alloy) and is independent of the grain crystal orientation. The results from this study will provide materials engineers confidence in nesting FAST-DB technology in future near net shape manufacturing routes.

Investigation on the diffusion bonding of tungsten and EUROFER97

Process optimization for diffusion bonding of tungsten with EUROFER97 using a vanadium interlayer

Investigation of tungsten/EUROFER97 diffusion bonding using Nb interlayer

Characterization of Ductile Nano-Tic Dispersed V4Cr4Ti/RAFMs Solid Diffusion Joint for Nuclear Fusion Reactor Application

Study on the Microstructure and Properties Evolution of CuCrZr/316LN-IG Explosion Bonding for ITER First Wall Components

Bonding Properties Evaluation for an EBW Joint of RAFM Steel by Using Notched Small Tensile Specimens

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Investigation of tungsten/steel diffusion bonding with Ni–Fe cladding on tungsten substrate

Microstructure, residual stresses and mechanical properties of diffusion bonded tungsten–steel joint using a V/Cu composite barrier interlayer

Tungsten/steel diffusion bonding using Cu/W–Ni/Ni multi-interlayer

Exploring FAST Technique for Diffusion Bonding of Tungsten to EUROFERE97 in DEMO First Wall

Investigation of tungsten/MA956 steel diffusion bonding with an Nb/Ni composite interlayer

Microstructure and mechanical properties of diffusion bonded joints between tungsten and F82H steel using a titanium interlayer

Investigation on W/Fe Diffusion Bonding Using Ti Foil and Ti Powder Interlayer by Sps

Effect of joining temperature on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer

Evaluation of Tungsten—Steel Solid-State Bonding: Options and the Role of CALPHAD to Screen Diffusion Bonding Interlayers

Interface Behaviors and Mechanical Properties of Diffusion Bonded 45 Steel/additive Manufactured 316L Steel Joints

On the use of CoCrFeNi high entropy alloy as a new interlayer for achieving high strength diffusion bonded tungsten/steel joint

Microstructure and mechanical properties of W/Cu vacuum diffusion bonding joints using amorphous Fe–W alloy as interlayer

Deformation Behaviour of a FAST Diffusion Bond Processed from Dissimilar Titanium Alloy Powders