Abstract:In this study, tungsten and steel were successfully bonded utilizing hot isostatic pressing diffusion bonding with a Ni-Si-B interlayer. The interfacial structures and formation mechanisms of joints with interlayers of various thicknesses were systematically investigated. The results indicated that the interfacial structure of a joint with a thin (0.8 μm) Ni-Si-B interlayer is a W/Fe-W inter-metallic compound (IMC) reaction layer/(Fe,Ni)ss diffusion layer/steel structure, where through cracks appear at the interface of the W/reaction layer, leading to poor shear strength. As the interlayer thickness increases (3.2 to 22.9 μm), the brittle Fe-W IMC no longer appears and the interfacial structure is a W/Ni-W IMCs reaction layer/(Ni,Fe)ss diffusion layer/steel structure. When the interlayer thickness is 3.2 μm, there are many large voids in the diffusion layer. When the interlayer thickness increases to 5.3 μm, the most compact interfacial structure can be obtained with the maximum bonding strength of 363.5 MPa. However, when the interlayer thickness increases further to 12.6 and 22.9 μm, many voids appear in the reaction layer, leading to a decrease in bonding strength. The formation mechanism of a joint with a thin (0.8 μm) interlayer is a purely solid-solid reaction without the generation of a liquid phase. When the interlayer thickness is large (3.2 to 22.9 μm), the formation process of joints includes three stages: solid-solid reaction, remaining interlayer liquefaction, and solid-liquid reaction. Electron probe microanalysis results reveal that the melting-point depressant element Si is segregated in the reaction layer or diffusion layer depending on the interlayer thickness, which is precisely controlled by the staged formation mechanism of the joints.

On the use of CoCrFeNi high entropy alloy as a new interlayer for achieving high strength diffusion bonded tungsten/steel joint

Characterization of Ductile Nano-Tic Dispersed V4Cr4Ti/RAFMs Solid Diffusion Joint for Nuclear Fusion Reactor Application

Interfacial microstructure and mechanical properties of tungsten alloy/steel diffusion bonding joint using CrFeCoNiCu high entropy alloy interlayer

Interfacial behaviour of the high-entropy alloy CuCoCrFeNi and TC4 joint obtained by vacuum diffusion welding

Investigation of tungsten/steel diffusion bonding with Ni–Fe cladding on tungsten substrate

Tungsten/steel diffusion bonding using Cu/W–Ni/Ni multi-interlayer

Interfacial microstructure and strengthening mechanism of W/steel diffusion bonding joint using a porous NiFeWss interlayer prepared by in-situ reduction

Interface Behaviors and Mechanical Properties of Diffusion Bonded 45 Steel/additive Manufactured 316L Steel Joints

Microstructure, residual stresses and mechanical properties of diffusion bonded tungsten–steel joint using a V/Cu composite barrier interlayer

Effect of joining temperature on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer

A novel high entropy composite interlayer for diffusion bonding of TC4 titanium alloy to 316 L stainless steel

Interfacial structure and formation mechanism of tungsten/steel HIP diffusion bonding joints using Ni interlayer

Microstructure and mechanical properties of W/Cu vacuum diffusion bonding joints using amorphous Fe–W alloy as interlayer

Effect of holding time on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer

Microstructure and mechanical properties of diffusion bonded joints between tungsten and F82H steel using a titanium interlayer

Microstructure, properties, and formation mechanisms of tungsten/steel hot isostatic pressing diffusion bonding joint utilizing a Ni-Si-B interlayer

Interfacial reaction and microstructure investigation of CoCrFeNiMo medium-entropy alloys diffusion-bonded joints

Microstructural evolution and mechanical properties in the partial transient liquid phase diffusion bonding of tungsten to steel

Effect of holding time on the microstructure and strength of tungsten/steel joints by HIP diffusion bonded using a Cu interlayer

Microstructure and strength of diffusion bonding W alloy/304 stainless steel joint using a Cu interlayer

Microstructural evolution, bonding mechanism and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy joint fabricated via diffusion bonding