Abstract:The use of additive manufacturing (AM) processes for industrial fabrication has grown rapidly over the last ten years. The most well-known AM technologies are fused deposition modelling and stereolithography techniques. One particular industry where 3D printing is advantageous over traditional fabrication techniques is within ceramic components due to its flexibility. To establish a new and improved level of print quality and reduce resource consumption in the 3D printing ceramics industry, there is a need for fast integrated, sub-surface and non-destructive inspection (NDI) with high resolution. Several techniques have already been developed for high-resolution NDI, such as X-ray computed tomography (XCT), but none of them are both fast, integrable, and non-destructive while allowing deep penetration with high resolution. In this study, we demonstrate sub-surface monitoring of 3D printed alumina parts to a depth of $\sim$0.7 mm in images of 400$\times$2048 pixels with a lateral resolution of 30$~\mu$m and depth (or axial) resolution of 7$~\mu$m . The results were achieved using mid-infrared optical coherence tomography (MIR OCT) based on a MIR supercontinuum laser with a 4$~\mu$m center wavelength. We find that it is possible to detect individual printed ceramic layers and track predefined defects through all four processing steps: green, preconditioned, debinded, and sintered. Our results also demonstrate how a defect in the green phase could affect the final product. Based on the understanding of how defects develop in maturing printed parts, we pave the way for NDI integration in AM, which can be combined with artificial intelligence and machine learning algorithms for automatic defect classification in volume production of a new standard of high quality ceramic components.

Utilization of handheld LIBS and XRF analyzers for impurity detection in 3D-printed ultra-high-temperature ceramics

Printing Three‐Dimensional Refractory Metal Patterns in Ambient Air: Toward High Temperature Sensors (Adv. Sci. 31/2023)

In situ elemental analysis and failures detection during additive manufacturing process utilizing laser induced breakdown spectroscopy

Broadband infrared confocal imaging for applications in additive manufacturing

[The application of inductively coupled plasma atomic emission spectrometry/mass spectrometry to the analysis of advanced ceramic materials].

Significant enhancment of the accuracy of impurity determination in vacuums using classification one-point laser-induced breakdown spectroscopy

Elemental Mapping of Silicone Rubber Composites by Laser-induced Breakdown Spectroscopy (LIBS)

In-situ Measurement Method of Material Ratio and Chemical Uniformity in Sintering–pelleting Operation Using Laser-Induced Breakdown Spectroscopy and Partial Least Squares Regression

Printing Three‐Dimensional Refractory Metal Patterns in Ambient Air: Toward High Temperature Sensors

Experimental Investigation of Laser-Induced Breakdown Spectroscopy Assisted with Laser-Induced Fluorescence for Trace Aluminum Detection in Steatite Ceramics.

Elemental Imaging Method Based on a Dielectric Barrier Discharge Probe Coupled with Inductively Coupled Plasma Mass Spectrometry

Determination of Potassium in Ceramic Raw Materials Using Laser-Induced Breakdown Spectroscopy Combined with Profile Fitting.

Mid-infrared optical coherence tomography and machine learning for inspection of 3D-printed ceramics at the micron scale

Rapid non-destructive inspection of sub-surface defects in 3D printed alumina through 30 layers with 7 μm depth resolution

Use of dilatometer to screen refractory raw materials

On the potential of ultrasonic time of flight instrumentation for the monitoring of thermal phenomena in laser powder bed fusion

In Situ Characterization of Laser Powder Bed Fusion Using High-Speed Synchrotron X-ray Imaging Technique

Laser-induced breakdown spectroscopy for real time and online elemental analysis

Quantitative analysis of main components in ceramic raw materials based on the desktop LIBS analyzer

Investigating the Relation Between Debinding Atmosphere and Mechanical Properties of Stereolithography-Based Three-Dimensional Printed Al2O3 Ceramic

Two-Dimensional X-Ray Diffraction (2D-XRD) and Micro-Computed Tomography (Micro-CT) Characterization of Additively Manufactured 316L Stainless Steel