Abstract:Metal additive manufacturing (AM) processes, such as laser powder bed fusion (L-PBF), can yield high-value parts with unique geometries and features, substantially reducing costs and enhancing performance. However, the material properties from L-PBF processes are highly sensitive to the laser processing conditions and the resulting dynamic temperature fields around the melt pool. In this study, we develop a methodology to measure thermal gradients, cooling rates, and solidification velocities during solidification of refractory alloy C103 using in situ high-speed infrared (IR) imaging with a high frame rate of approximately 15,000 frames per second (fps). Radiation intensity maps are converted to temperature maps by integrating thermal radiation over the wavelength range of the camera detector while also considering signal attenuation caused by optical parts. Using a simple method that assigns the liquidus temperature to the melt pool boundary identified ex situ, a scaling relationship between temperature and the IR signal was obtained. The spatial temperature gradients (dT/dx), heating/cooling rates (dT/dt), and solidification velocities (R) are resolved with sufficient temporal resolution under various laser processing conditions, and the resulting microstructures are analyzed, revealing epitaxial growth and nucleated grain growth. Thermal data shows that a decreasing temperature gradient and increasing solidification velocity from the edge to the center of the melt pool can induce a transition from epitaxial to equiaxed grain morphology, consistent with the previously reported columnar to equiaxed transition (CET) trend. The methodology presented can reduce the uncertainty and variability in AM and guide microstructure control during AM of metallic alloys.

Broadband infrared confocal imaging for applications in additive manufacturing

Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing

In Situ Characterization of Laser Powder Bed Fusion Using High-Speed Synchrotron X-ray Imaging Technique

On-the-fly 3D metrology of volumetric additive manufacturing

Ultrafast X-ray Imaging of Laser–metal Additive Manufacturing Processes

Single-camera Two-Wavelength Imaging Pyrometry for Melt Pool Temperature Measurement and Monitoring in Laser Powder Bed Fusion based Additive Manufacturing

Sub-surface thermal measurement in additive manufacturing via machine learning-enabled high-resolution fiber optic sensing

Simultaneous Particle Tracking and Temperature Measurements during Additive Manufacturing using a High-speed Spectral Plenoptic Camera

Transient Dynamics of Powder Spattering in Laser Powder Bed Fusion Additive Manufacturing Process Revealed by In-Situ High-Speed High-Energy X-Ray Imaging

Laser-metal interaction dynamics during additive manufacturing resolved by detection of thermally-induced electron emission

On the potential of ultrasonic time of flight instrumentation for the monitoring of thermal phenomena in laser powder bed fusion

Resolving thermal gradients and solidification velocities during laser melting of a refractory alloy

Pixelwise high-temperature calibration for in-situ temperature measuring in powder bed fusion of metal with laser beam

A survey of thermal sensing application in additive manufacturing

In-situ monitoring of a laser metal deposition (LMD) process: comparison of MWIR, SWIR and high-speed NIR thermography

Surface texture measurement for additive manufacturing

In-situ Monitoring and Deformation Characterization by Optical Techniques; Part I: Laser-aided Direct Metal Deposition for Additive Manufacturing

In-Situ Infrared Camera Monitoring for Defect and Anomaly Detection in Laser Powder Bed Fusion: Calibration, Data Mapping, and Feature Extraction

Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Thermal Based Process Monitoring for Laser Powder Bed Fusion (LPBF)