Abstract:In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.

Experimental Investigation of Laser-Induced Breakdown Spectroscopy Assisted with Laser-Induced Fluorescence for Trace Aluminum Detection in Steatite Ceramics.

Laser-induced Molecular Fluorescence Diagnosis of Aluminum Monoxide Evolution in Laser-Induced Plasma

Detection of Trace Elements in Active Luminescent Glass Using Laser-induced Breakdown Spectroscopy Combined with Laser-induced Fluorescence

Research progress on the application of laser-induced breakdown spectroscopy in metal element detection

Evaluation of Optical Depths and Self-Absorption of Strontium and Aluminum Emission Lines in Laser-Induced Breakdown Spectroscopy (LIBS)

Investigation of Excitation Interference in Laser-Induced Breakdown Spectroscopy Assisted with Laser-Induced Fluorescence for Chromium Determination in Low-Alloy Steels

Quantitative aluminum alloys analysis using laser-induced breakdown spectroscopy

Detection of calcium homogeneity distribution in magnesia-aluminum spinel using laser-induced breakdown spectroscopy

Spectral Interference Elimination and Self-Absorption Reduction in Laser-Induced Breakdown Spectroscopy Assisted with Laser-Stimulated Absorption

In-situ analysis of laser-induced breakdown spectra for online monitoring of femtosecond laser machining of sapphire

Improvement of Spectral Intensity and Resolution with Fiber Laser for On-Stream Slurry Analysis in Laser-Induced Breakdown Spectroscopy

Influence of Laser Wavelength on Self-Absorption Effect in Laser-Induced Breakdown Spectroscopy

Determination of film thickness and element content dependence for laser-induced breakdown spectroscopy (LIBS) of an AlZnO film

Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy

Calibration-free Analysis of Immersed Metal Alloys Using Long-Pulse-duration Laser-Induced Breakdown Spectroscopy

Laser induced breakdown spectroscopy based on single beam splitting and geometric configuration for effective signal enhancement

Determinations of Trace Boron in Superalloys and Steels Using Laser-Induced Breakdown Spectroscopy Assisted with Laser-Induced Fluorescence

Effect of single and double pulse laser-induced breakdown spectroscopy towards steel alloy in different gaseous media

Multielemental Self-Absorption Reduction in Laser-Induced Breakdown Spectroscopy by Using Microwave-Assisted Excitation

Detection of trace substances adhered to a metal surface by laser-induced breakdown spectroscopy

Novel Signal Enhancement Strategy for Laser-Induced Breakdown Spectroscopy via Miniaturized Atmospheric Pressure Glow Discharge