Abstract:In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.

Detection of Trace Elements in Active Luminescent Glass Using Laser-induced Breakdown Spectroscopy Combined with Laser-induced Fluorescence

Design, Simulation, Elaboration and Luminescence of Tb3+-doped Ba0.84Gd0.16F2.16 Fluoroaluminosilicate Scintillating Glass Ceramics

Local Vibration Around Rare Earth Ions in Alkaline Earth Fluorosilicate Transparent Glass and Glass Ceramics Using Eu3+ Probe

Experimental Investigation of Laser-Induced Breakdown Spectroscopy Assisted with Laser-Induced Fluorescence for Trace Aluminum Detection in Steatite Ceramics.

Research progress on the application of laser-induced breakdown spectroscopy in metal element detection

Determinations of Trace Boron in Superalloys and Steels Using Laser-Induced Breakdown Spectroscopy Assisted with Laser-Induced Fluorescence

Novel Signal Enhancement Strategy for Laser-Induced Breakdown Spectroscopy via Miniaturized Atmospheric Pressure Glow Discharge

Laser-Induced Breakdown Spectroscopy (LIBS) for Trace Element Detection: A Review

Redistribution of Elements in Glass Induced by a High-Repetition-rate Femtosecond Laser.

Detection of calcium homogeneity distribution in magnesia-aluminum spinel using laser-induced breakdown spectroscopy

Efficient Enhancement of Bismuth NIR Luminescence by Aluminum and Its Mechanism in Bismuth‐Doped Germanate Laser Glass

Evaluating Laser-Induced Breakdown Spectroscopy Sensor Technology for Rapid Source Characterization of Rare Earth Elements

Micromodification of Element Distribution in Glass Using Femtosecond Laser Irradiation.

Determination of film thickness and element content dependence for laser-induced breakdown spectroscopy (LIBS) of an AlZnO film

Laser-induced Molecular Fluorescence Diagnosis of Aluminum Monoxide Evolution in Laser-Induced Plasma

Methods of Data Processing for Trace Elements Analysis Using Laser Induced Breakdown Spectroscopy

Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy

Multielemental Self-Absorption Reduction in Laser-Induced Breakdown Spectroscopy by Using Microwave-Assisted Excitation

Measurement of uranium in a glass matrix based on spatial confinement using fiber-optic laser-induced breakdown spectroscopy

Quantitatively Identifying the Upconversion Luminescence Mechanisms of Er3+:NaYF4 Nanocrystals in Aluminosilicate Glass Ceramics under Femtosecond Laser Field

Spectral Interference Elimination and Self-Absorption Reduction in Laser-Induced Breakdown Spectroscopy Assisted with Laser-Stimulated Absorption