Abstract:We propose the use of Optical Coherence Tomography (OCT) as a tool for the quality control of 3-D-printed ceramics. Test samples with premeditated defects, namely single- and two-component samples of zirconia, titania, and titanium suboxides, were printed by stereolithography-based DLP (Digital Light Processing) processes. The OCT tomograms obtained on the green samples showed the capability of the method to visualize variations in the layered structure of the samples as well as the presence of cracks and inclusions at depths up to 130 µm, as validated by SEM images. The structural information was visible in cross-sectional images as well as in plan-view images. The optical signal measured from the printed zirconia oxide and titanium oxide samples showed strong attenuation with depth and could be fit with an exponential decay curve. The variations of the decay parameter correlated very well with the presence of defects and material variation. When used as an imaging quantity, the decay parameter projects the position of the defects into 2-D (X,Y) coordinates. This procedure can be used in real time, it reduces the data volume up to 1000 times, and allows for faster subsequent data analysis and transfer. Tomograms were also obtained on sintered samples. The results showed that the method can detect changes in the optical properties of the green ceramics caused by sintering. Specifically, the zirconium oxide samples became more transparent to the light used, whereas the titanium suboxide samples became entirely opaque. In addition, the optical response of the sintered zirconium oxide showed variations within the imaged volume, indicating material density variations. The results presented in this study show that OCT provides sufficient structural information on 3-D-printed ceramics and can be used as an in-line tool for quality control.

Mid-infrared optical coherence tomography and machine learning for inspection of 3D-printed ceramics at the micron scale

Rapid non-destructive inspection of sub-surface defects in 3D printed alumina through 30 layers with 7 μm depth resolution

Signal-Decay Based Approach for Visualization of Buried Defects in 3-D Printed Ceramic Components Imaged with Help of Optical Coherence Tomography

Back to Michelson Interferometer: a Precise Inspection System for Industrial Intricate Structures Defect Detection

Machine Vision-Based Surface Defect Detection Study for Ceramic 3D Printing

Research on anti-interference detection of 3D-printed ceramics surface defects based on deep learning

In situ defect detection and feedback control with three-dimensional extrusion-based bioprinter-associated optical coherence tomography

Assisted defect detection by in-process monitoring of additive manufacturing using optical imaging and infrared thermography

Broadband infrared confocal imaging for applications in additive manufacturing

Multi-Modal Artificial Intelligence in Additive Manufacturing: Combining Thermal and Camera Images for 3D-Print Quality Monitoring

Machine-learning based methodologies for 3d x-ray measurement, characterization and optimization for buried structures in advanced ic packages

Additive manufacturing in ceramics: targeting lightweight mirror applications in the visible, ultraviolet and X-ray

Nondestructive and fined characterization of injection molded ceramic parts by industrial computed tomography

Defect detection by multi-axis infrared process monitoring of laser beam directed energy deposition

Automated Control of Surface Defects on Ceramic Tiles Using 3D Image Analysis

3D printing of unsupported multi-scale and large-span ceramic via near-infrared assisted direct ink writing

3-D computed tomography for testing ceramic parts

3D printing of ceramics: Advantages, challenges, applications, and perspectives

Stereolithographic 3D printing of ceramics: challenges and opportunities for structural integrity

Multi-resolution Quality Inspection of Layerwise Builds for Metal 3D Printer-and-Scanner