Abstract:Flat-plate solar collector systems are devices used to convert solar energy to thermal energy. These devices require a selective coating that absorbs all sunlight but does not emit energy in the near IR; hence, a multilayer system of metal/IR-reflector/metal oxide is often used. Many substrates are used, including metals such as copper, stainless steel, and aluminum. Aluminum is an interesting substrate for its lower cost and good optical properties. Electrodeposited materials have gained importance in the industry for the easy handling and good results in scale-up. However, in general it is difficult to electrodeposit onto aluminum due to the ever-present thin insulating oxide film. In this work, we propose an adherent interlayer film based on copper, which is electrodeposited onto aluminum, and serves as a basis for the subsequent electrodeposition of a selective coating consisting of bright nickel and the absorber film of electrodeposited black nickel. Solar collectors based on aluminum substrates and this electrodeposited selective coating are specifically useful for thermo-solar applications at low to medium temperature. Electrochemistry studies including cyclic voltammetry, rotating disk cyclic voltammetry, and galvanostatic curves are carried out for all the different layers. The properties of the coatings are subsequently characterized by reflectance spectra using UV-Vis, NIR and IR spectrophotometers equipped with integrating spheres. The solar absorptance is calculated by weighting the reflectance spectrum against the solar radiation spectrum ASTM G173-03. The thermal emittance is calculated weighting the reflectance spectra against the black body radiation function at 100 °C. The morphology and homogeneity of the film are evaluated with scanning electron microscopy, and energy dispersive spectroscopy. X-ray photoelectron spectrometry is used to determine the film composition. The crystalline structure of the films is studied by X-ray diffraction and Raman measurements. The second and third layer, bright nickel, and black nickel, respectively, are electrodeposited on top of the Cu layer using a previously reported method. We characterize the selective coating electrodeposited onto aluminum/Cu/bright nickel and show that this is a viable technology for the fabrication of low-cost and high efficiency flat plate solar collectors. In addition, we demonstrate the scale-up of the electrodeposition process, and characterize the performance of a complete flat-plate solar collector device of 1.8 m 2 gross area. Acknowledgements The authors gratefully acknowledge CONACYT, Módulo Solar S.A. de C.V. and IER-UNAM for funding through the Mexican Center for Innovation in Solar Energy (CeMIE-Sol), Project P-81.

Synthesis and Characterization of Multilayered CrAlN/Al2O3 Tandem Coating Using HiPIMS for Solar Selective Applications at High Temperature

Structure and Thermal Stability of Spectrally Selective Absorber Based on Alcron Coating for Solar-Thermal Conversion Applications

On the thermal stability and performance evaluation of Si doped transition metal nitride/oxide nanolayered multilayer-based spectrally selective absorber for high-temperature photothermal applications

Design, synthesis and thermal stability study on graded TiN O solar selective absorbing coating fabricated by pulsed DC reactive magnetron sputtering

Fabrication, microstructures and optical reflectivity of TiAlN/NiCr composite coating

A Novel Design For High-Temperature Solar Selective Coating

Microstructure, Optical and Electrical Properties of Craln Film As A Novel Material for High Temperature Solar Selective Absorber Applications

A Single Layer of Chromium Oxide Nanoparticles Films Coated with Carbon by Applying Exploding Wire Technique for Efficient Solar Selective Absorber

Transition metal nitride/oxide-based multilayer PVD coating with sol–gel derived ormosil passivation layer as an efficient solar absorber: Studies on high temperature stability and performance evaluation

Further investigation of a novel high entropy alloy MoNbHfZrTi based solar absorber coating with double antireflective layers

Scalable and Ultrathin High‐Temperature Solar Selective Absorbing Coatings Based on the High‐Entropy Nanoceramic AlCrWTaNbTiN with High Photothermal Conversion Efficiency

NiCrAlO/Al2O3 Solar Selective Coating Prepared by Direct Current Magnetron Sputtering and Water Boiling

Cr-(CrN/TiAlN)m-AlSiN-AlSiO open-air stable solar selective coating for concentrated solar thermal power applications

A novel multilayer high temperature colored solar absorber coating based on high-entropy alloy MoNbHfZrTi: Optimized preparation and chromaticity investigation

Microstructure and Thermal Stability of Cu/TixSiyN/AlSiN Solar Selective Absorbing Coating

(Digital Presentation) Electrodeposition and Characterization of a Selective Coating on Aluminum for Scale-up in Thermo-Solar Applications

Double-layer solar absorber coating based on high entropy ceramic AlCrMoTaTiN: Structure, optical properties and failure mechanism

Optical Performance, Thermal Stability, and Failure Analysis of the WN x -Si 3 N 4 Multilayer Solar Selective Absorbing Coatings

High-temperature thermal stable solar selective absorbing coating based on the dielectric-metal-dielectric structure

Enhanced thermal stability of the metal/dielectric multilayer solar selective absorber by an atomic-layer-deposited Al2O3 barrier layer

Mechanical and Tribological Properties of the CrAl/CrAlN and CrAl/CrAlN-(a-CNx) Multilayers Deposited by HIPIMS