Abstract:TiCrAlN hard films based on TiN or CrN show superior properties in terms of hardness, wear resistance, and thermal stability due to the addition of alloying elements. AlCrTiN films based on AlN may have higher thermal shock properties, but the knowledge of AlCrTiN films with high Al content has been insufficient until now. In this study, two sets of AlCrTiN hard films with different Al contents of 48 at.% and 58 at.% among metal components were prepared via multi-arc ion plating so as to investigate the effect of Al content on the phase composition, hardness, and thermal shock resistance of the films. The same microstructures, morphologies, and thicknesses of the fabricated film samples were achieved by changing the combination of cathode alloy targets and adjusting the arc source current during deposition. The surface chemical composition, cross-sectional elemental distribution, microstructure, morphology, phase composition, surface hardness, film/substrate adhesion strength, and thermal shock performance of the AlCrTiN films were examined. The obtained results reveal that the two sets of AlTiCrN hard films are face-centered cubic solid solutions with a columnar fine grain structure and a preferred growth orientation of (200) crystal plane. The hardness of the AlCrTiN films can be improved up to HV2850 by properly reducing the Al content from 58 at.% to 48 at.%. Meanwhile, the film/substrate adhesion performance is strong enough in terms of critical loads greater than 200 N. Furthermore, the AlCrTiN films maintain high thermal shock resistance at 600 °C when the Al content decreases from 58 at.% to 48 at.%. The optimal composition of the AlCrTiN hard films is 25:13:15:47 (at.%), based on the consideration of hardness, adhesion, and thermal shock cycling resistance. This optimal AlCrTiN hard film can be suggested as an option for protective coatings of hot process die tools.

Microstructure, Optical and Electrical Properties of Craln Film As A Novel Material for High Temperature Solar Selective Absorber Applications

Growth and Properties of CrN x /TiN y /Al Based on N 2 Gas Flow Rate for Solar Thermal Applications

Study of Nanocrystalline Fe-Al-N Soft Magnetic Thin Films

Nano-Cr-film-based solar selective absorber with high photo-thermal conversion efficiency and good thermal stability

Synthesis and Characterization of Multilayered CrAlN/Al2O3 Tandem Coating Using HiPIMS for Solar Selective Applications at High Temperature

Phase Composition, Hardness, and Thermal Shock Properties of AlCrTiN Hard Films with High Aluminum Content

Scalable and highly efficient high temperature solar absorber coatings based on high entropy alloy nitride AlCrTaTiZrN with different antireflection layers

A facile process to prepare crosslinked nano-graphites uniformly dispersed in titanium oxide films as solar selective absorbers

High-Entropy Alloy Nitride AlMo 0.5 NbTa 0.5 TiZrN x -Based High-Temperature Solar Absorber Coating: Structure, Optical Properties, and Thermal Stability

STUDY OF MEDIUM-FREQUENCY SPUTTERING OF GRADED Al-AlN SOLAR SELECTIVE ABSORBERS

Annealing enhanced optical performances of nano-multilayered TiAlN/AlCrSiN-based solar selective absorber

Scalable and Ultrathin High‐Temperature Solar Selective Absorbing Coatings Based on the High‐Entropy Nanoceramic AlCrWTaNbTiN with High Photothermal Conversion Efficiency

Structure and Thermal Stability of Spectrally Selective Absorber Based on Alcron Coating for Solar-Thermal Conversion Applications

Synthesis and characterization of nanocrystalline Ti(1-x)Al(x)N by reactive magnetron sputtering

Double-layer solar absorber coating based on high entropy ceramic AlCrMoTaTiN: Structure, optical properties and failure mechanism

Further investigation of a novel high entropy alloy MoNbHfZrTi based solar absorber coating with double antireflective layers

Solar spectral selective absorbing surface by interference and absorption

Fabrication, microstructures and optical reflectivity of TiAlN/NiCr composite coating

Structure, mechanical properties and thermal stability of CrAlNbN/TiN multilayers

Sputtered Aluminium-Nitrogen Solar Absorbing Selective Surfaces For All-Glass Evacuated Collectors

High temperature annealing effects on optical performance of TiAlN-based solar selective absorber with TiN IR reflector