Abstract:Most cermet-based coatings achieve their solar selectivities by the tandem interference effect, which has been widely studied. This study focused on the spectral selectivity achieved by the scattering effect of metal particles in cermet-based coatings. Previous research proved that reasonable solar selectivities can be obtained for cermets in the regime of particles with a radius of the order of 100 nm, but their solar absorptance is low (<90%). In our research, the effect of metal particles on the spectral selectivity of cermets was studied by the Mie theory and Monte Carlo simulation for Cr, Ni, and W particles with radii of 10 nm, 50 nm, 100 nm, and 200 nm, which were embedded in Al2O3 and occupied 5% of the volume fraction. It was found that by arranging different particles in different layers, a very high solar absorptance (95.6%) could be achieved. Since their thermal emittance (∼25% at 600 °C) was higher than that of normal coatings, these coatings are recommended to be used in solar absorbers that have a high concentration factor. Finally, the dependent scattering effect was qualitatively considered by the coupled-dipole approach. With a metal volume fraction of 5%, it was found that the effect of dependent scattering was small and should not change the conclusions made based on independent scattering.

Solar spectral selective absorbing surface by interference and absorption

Sputtered Aluminium Composite Selective Absorbing Surfaces

Design on solar selective absorbing surface with interference effect

Sputtered solar selective absorbing surfaces based on aluminum and stainless steel composites

Sputtered Aluminium-Nitrogen Solar Absorbing Selective Surfaces For All-Glass Evacuated Collectors

STUDY OF MEDIUM-FREQUENCY SPUTTERING OF GRADED Al-AlN SOLAR SELECTIVE ABSORBERS

Scalable All-Ceramic Nanofilms As Highly Efficient and Thermally Stable Selective Solar Absorbers

Porous Carbon–titania Nanocomposite Films for Spectrally Solar Selective Absorbers

Investigation on Solar Absorption and Thermal Emittance of Al Films Deposited by Magnetron Sputtering

Microstructure, Optical and Electrical Properties of Craln Film As A Novel Material for High Temperature Solar Selective Absorber Applications

Study on A Novel Selective Solar Absorber with Surface Ultrathin Metal Film

Numerical Study of Alloy/Nanocomposite-based Solar Selective Absorber with High Photo-Thermal Conversion Efficiency

Study on Medium-Frequency Sputtering of Graded Ni-AlN Selective Absorbers

SOLAR SELECTIVE ABSORBER BASED ON PARTICLE-SCATTERING EFFECT

A Facile One-Step Method to Fabricate Multi-Scaled Solar Selective Absorber with Nano-Composite and Controllable Micro-Porous Texture

Scalable and highly efficient high temperature solar absorber coatings based on high entropy alloy nitride AlCrTaTiZrN with different antireflection layers

Growth and Properties of CrN x /TiN y /Al Based on N 2 Gas Flow Rate for Solar Thermal Applications

A Novel Design For High-Temperature Solar Selective Coating

Further investigation of a novel high entropy alloy MoNbHfZrTi based solar absorber coating with double antireflective layers

Design, synthesis and thermal stability study on graded TiN O solar selective absorbing coating fabricated by pulsed DC reactive magnetron sputtering

Effect of Metal Particles in Cermets on Spectral Selectivity