Abstract:Recent advances in high-entropy alloys have spurred many breakthroughs in the fields of high-temperature materials and optical materials and they provide incredible application potentialities for photothermal conversion systems. Solar-selective absorbers (SSAs), as key components, play a vital role in photothermal conversion efficiency and service life. The most pressing problem with SSAs is their inconsistent optical performance, an instability constraint induced by thermal stress. A feasible method of improving performance stability is the introduction of high-entropy materials, such as high-entropy alloy nitrides. In this study, enabled by an intrinsic MoTaTiCrN absorption layer, the solar configuration achieves greatly enhanced, exceptional thermotolerance and optical properties, leading to the formation of a scalable, highly efficient, and cost-effective structure. Computational and experimental approaches are employed to achieve optimum preparation parameters for thicknesses and constituents. The crystal structure of high-entropy ceramic MoTaTiCrN is fully investigated, including thickness-dependent crystal nucleation. High-temperature and long-term thermal stability tests demonstrate that our proposed SSA is mechanically robust and chemically stable. Moreover, a low thermal emittance (15.86%) at 500 °C promotes the photothermal conversion efficiency. In addition, due to the exceptional spectral selectivity (α/ε = 92.3/6.5%), thermal robustness (550 °C for 168 h), and photothermal conversion efficiency (86.9% at 550 °C under 100 sun), it is possible for our proposed SSA to enhance the practical realization of large-area photothermal conversion applications, especially for concentrated solar power systems.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c23011?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c23011</a>.Experimental data; optical models of the MoTaTiCrN coating; EDS of the MoTaTiCrN coating; reflectance spectra of the layer-added coatings; reflectance spectra of the coating annealed at 800 °C for 2 h; SEM images of the coating after annealing treatment; reflectance spectra of the coating annealed at 600 °C for 20 and 168 h; and the impact of temperature and concentration ratio on the photothermal conversion efficiency (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c23011/suppl_file/am0c23011_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-temperature thermal stable solar selective absorbing coating based on the dielectric-metal-dielectric structure

Scalable All-Ceramic Nanofilms As Highly Efficient and Thermally Stable Selective Solar Absorbers

Ultra-broad Wavelength Absorption in High-temperature Solar Selective Absorber Coatings Enabled by High-entropy Nanoceramic AlTiZrHfNbN for High Performance Solar-thermal Conversion

Enhanced high-temperature thermal stability of the novel MoAlSiN-based solar selective absorbing coatings by optimizing the multilayer structure

High-Entropy Alloy Nitride AlMo 0.5 NbTa 0.5 TiZrN x -Based High-Temperature Solar Absorber Coating: Structure, Optical Properties, and Thermal Stability

Optical Performance, Thermal Stability, and Failure Analysis of the WN x -Si 3 N 4 Multilayer Solar Selective Absorbing Coatings

Scalable and Ultrathin High‐Temperature Solar Selective Absorbing Coatings Based on the High‐Entropy Nanoceramic AlCrWTaNbTiN with High Photothermal Conversion Efficiency

On the thermal stability and performance evaluation of Si doped transition metal nitride/oxide nanolayered multilayer-based spectrally selective absorber for high-temperature photothermal applications

Efficient, Scalable, And High-Temperature Selective Solar Absorbers Based On Hybrid-Strategy Plasmonic Metamaterials

Greatly enhanced solar absorption via high entropy ceramic AlCrTaTiZrN based solar selective absorber coatings

Nanometer-Thick High-Entropy Alloy Nitride Al 0.4 Hf 0.6 NbTaTiZrN-Based Solar Selective Absorber Coatings

Structure and Thermal Stability of Spectrally Selective Absorber Based on Alcron Coating for Solar-Thermal Conversion Applications

Enhancing thermal robustness of a high-entropy nitride based solar selective absorber by the incorporation of Al element

Microstructure and Optical Properties of W/W‐WxN/WOx Multilayer Metal‐Dielectric Solar Selective Absorbing Coating

Highly Enhanced Thermal Robustness and Photothermal Conversion Efficiency of Solar-Selective Absorbers Enabled by High-Entropy Alloy Nitride MoTaTiCrN Nanofilms

A Facile One-Step Method to Fabricate Multi-Scaled Solar Selective Absorber with Nano-Composite and Controllable Micro-Porous Texture

Enhanced thermal stability of the metal/dielectric multilayer solar selective absorber by an atomic-layer-deposited Al2O3 barrier layer

Improvement of thermal stability of ZrSiON based solar selective absorbing coating

Microstructure and Thermal Stability of Cu/TixSiyN/AlSiN Solar Selective Absorbing Coating

Enhanced thermal stability of Mo film with low infrared emissivity by a TiN barrier layer

Toward a Scalable and Cost-Conscious Structure in Spectrally Selective Absorbers: Using High-Entropy Nitride TiVCrAlZrN