Abstract:In this work, the gate controllability of WSe2 channel with varying thickness from monolayer to ten‐layer is investigated, by fabricating van der Waals contacted WSe2 devices. The findings demonstrate negligible hysteresis and excellent subthreshold swing observed when utilizing WSe2 channel thicknesses ≥ five‐layer. However, by reducing the WSe2 channel thickness below the trilayer, the subthreshold swing deviates from the thermal limit. The pursuit of near‐ideal subthreshold swing (SS) ≈ 60 mV dec−1 is a primary driving force to realize the power‐efficient field‐effect transistors (FETs). This challenge is particularly pronounced in 2D material‐based FETs, where the presence of a large interface trap density (Dit) imposes limitations on electrostatic control, consequently escalating power consumption. In this study, the gate controllability of 2D FETs is systematically analyzed by fabricating pre‐patterned van der Waals (vdW)‐contacted p‐FETs, varying the WSe2 channel thickness from monolayer to ten‐layer. As a result, the channel thickness is optimized to achieve efficient gate controllability while minimizing Dit. The findings demonstrate negligible hysteresis and excellent subthreshold swing (SSmin) close to the thermal limit (≈60 mV dec−1), with a corresponding Dit of ≈1010 cm−2 eV−1, comparable to Dit values observed in state‐of‐the‐art Si transistors, when utilizing WSe2 channel thicknesses ≥ five‐layer. However, reducing the WSe2 channel thickness below the trilayer, SSmin (≈91 mV dec−1) deviates from the thermal limit, attributed to a comparatively higher Dit (≈1011 cm−2 eV−1), despite the still lower than values reported for surface‐contacted 2D transistors. Furthermore, all devices exhibit consistent p‐type characteristics, featuring a high ION/IOFF ratio, high mobility, and excellent electrical stability confirmed over several months.

Se-Vacancy Healing with Substitutional Oxygen in WSe2 for High-Mobility p-Type Field-Effect Transistors

High Mobility 2D Palladium Diselenide Field-Effect Transistors with Tunable Ambipolar Characteristics.

High Performance WSe2 Field-Effect Transistors via Controlled Formation of In-Plane Heterojunctions

A ferroelectric relaxor polymer-enhanced p-type WSe2 transistor

Hole mobility enhancement in monolayer WSe2 p-type transistors through molecular doping

Atomically Controlled Tunable Doping in High Performance WSe2 Devices

Mobility Enhancement and Hysteresis Phenomenon in WSe2 FETs

Electron and Hole Mobilities in Single-Layer WSe2

Selective Electron Beam Patterning of Oxygen-Doped WSe2 for Seamless Lateral Junction Transistors

Repairing Atomic Vacancies in Single-Layer MoSe2 Field-Effect Transistor and Its Defect Dynamics

In Situ Defect Engineering of Controllable Carrier Types in WSe 2 for Homomaterial Inverters and Self-Powered Photodetectors

Achieving Ultrahigh Electron Mobility in PdSe2 Field‐Effect Transistors via Semimetal Antimony as Contacts

Novel High-Mobility Field-Effect Transistors Based on Transition Metal Dichalcogenides

Recessed-Channel WSe2 Field-Effect Transistor via Self-Terminated Doping and Layer-by-Layer Etching

Flexible p-Type WSe2 Transistors with Alumina Top-Gate Dielectric

High-Mobility Inse Transistors: the Role of Surface Oxides

High Mobilities in Layered InSe Transistors with Indium-Encapsulation-Induced Surface Charge Doping.

PdSe2/MoSe2: A promising van der waals heterostructure for field effect transistor application

High Mobility Transistors and Flexible Optical Synapses Enabled by Wafer-Scale Chemical Transformation of Pt-Based 2D Layers

Achieving Near‐Ideal Subthreshold Swing in P‐Type WSe2 Field‐Effect Transistors

High-Fidelity Transfer of 2D Semiconductors and Electrodes for Van Der Waals Devices