Abstract:FeCrAl oxide dispersion strengthened (ODS) steel is regarded as one of the most promising candidate materials for nuclear fission reactors such as supercritical pressurized water reactor (SCPWR), sodium-cooled fast reactor (SFR), and lead bismuth-cooled fast reactor (LFR) and so on, since it has excellent irradiation resistance and good corrosion resistance of super-critical water and Pb–Bi coolants. In the present work, irradiation response of a Zr-added FeCrAl ODS steel (15Cr–4Al-0.1Ti-0.6Zr) together with an Al-free ODS (16Cr-0.1Ti) steel and a non-ODS steel T91 was studied. Electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM) were used to characterize the microstructures including grains, dislocations, and oxides in the pristine specimens and irradiation defects in the irradiated specimens. Nano-indentation tests were used to evaluate the change in hardness after irradiation. The oxides in the 15Cr–4Al-0.1Ti-0.6Zr specimen are slightly larger than those in the 16Cr-0.1Ti specimen, but with a similar number density. After irradiated with 9.45 MeV 83Bi35+ to 26 dpa at ambient temperature, hardening was observed in all the specimens. Irradiation hardening of the 15Cr–4Al-0.1Ti-0.6Zr specimen is slightly higher than the 16Cr-0.1Ti specimen but significantly lower than the non-ODS steel T91. The irradiation defects in the ODS steel specimens are apparently smaller than those in T91 with a similar number density. By calculating sink strength of the initial microstructures such as grains, dislocations and oxides, the evolution of irradiation defects was discussed. A linear relationship between the irradiation hardening and the sink strength was established. A similar linear relationship between the calculated irradiation hardening using the TEM data (based on dispersion barrier hardening model (DBH) and Friedel-Kroupa-Hirsch (FKH) model, respectively) and sink strength was also found. The calculated irradiation hardening is relatively lower than the experimental value, indicating the possible contribution of Cr segregation to hardening which needs further study.

Microstructure response and lead-bismuth eutectic corrosion behavior of 11Cr1Si ferritic/martensitic steel after Au-ion irradiation

Microstructure evolution and lead-bismuth eutectic corrosion behavior of 11Cr1Si ferritic/martensitic steel after proton irradiation

In-situ proton irradiation/lead-bismuth eutectic corrosion synergistic effect on corrosion behaviour of 11Cr1W1Si ferritic/martensitic steel

Effect of Au-ion irradiation on the morphology, microstructure and lead-bismuth eutectic corrosion behavior of refractory TiNbZrMoV high-entropy alloy coating

Microstructure response and LBE corrosion behavior of the FeCrAlY coating after Au-ions irradiation

Irradiation effects on microstructure, mechanical properties, and lead-bismuth eutectic corrosion resistance of alumina coating

Effect of Au-ions irradiation on mechanical and LBE corrosion properties of amorphous AlCrFeMoTi HEA coating: Enhanced or deteriorated?

Dislocation loops and hardening induced by Au ion irradiation in FeCrAl alloys with three solute concentrations

Effect of Au-ions irradiation on microstructure and mechanical properties of FeCrAl coating

Structure of surface oxides on martensitic steel under simultaneous ion irradiation and molten LBE corrosion

Microstructure Characterization and Hardening Evaluation of Ferrite/Martensitic Steels Induced by He2+ Irradiation

Corrosion behaviour of 11Cr1Si ferritic/martensitic steel in static liquid lead-bismuth eutectic at 450-550 °C

Corrosion behavior of the FeCrAl coating with different Cr and Al contents before and after Au-ions irradiation in stagnant LBE

Effect of Post-irradiation Annealing on Microstructure Evolution and Hardening in GH3535 Alloy Irradiated by Au Ions

A comparison study of change in hardness and microstructures of a Zr-added FeCrAl ODS steel irradiated with heavy ions

Microstructure, mechanical properties and lead-bismuth eutectic corrosion behavior of FeCrAlTiNb high-entropy alloy coatings

Microstructures and Ion-Irradiation Behaviour of Friction Stir Welded 12Cr-Ods Steel

Au ion irradiation effects on microstructure and deuterium permeation resistance of Al/Al 2 O 3 coating

Effect of irradiation defects on the corrosion behaviors of steels exposed to lead bismuth eutectic in ADS: a first-principles study.

The microstructure effects on irradiation response of ferritic – martensitic steels

Behavior of Fe-Based Alloys in a Liquid Lead-Bismuth Environment under Simultaneous Proton Irradiation and Corrosion