Abstract:FeCrAl oxide dispersion strengthened (ODS) steel is regarded as one of the most promising candidate materials for nuclear fission reactors such as supercritical pressurized water reactor (SCPWR), sodium-cooled fast reactor (SFR), and lead bismuth-cooled fast reactor (LFR) and so on, since it has excellent irradiation resistance and good corrosion resistance of super-critical water and Pb–Bi coolants. In the present work, irradiation response of a Zr-added FeCrAl ODS steel (15Cr–4Al-0.1Ti-0.6Zr) together with an Al-free ODS (16Cr-0.1Ti) steel and a non-ODS steel T91 was studied. Electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM) were used to characterize the microstructures including grains, dislocations, and oxides in the pristine specimens and irradiation defects in the irradiated specimens. Nano-indentation tests were used to evaluate the change in hardness after irradiation. The oxides in the 15Cr–4Al-0.1Ti-0.6Zr specimen are slightly larger than those in the 16Cr-0.1Ti specimen, but with a similar number density. After irradiated with 9.45 MeV 83Bi35+ to 26 dpa at ambient temperature, hardening was observed in all the specimens. Irradiation hardening of the 15Cr–4Al-0.1Ti-0.6Zr specimen is slightly higher than the 16Cr-0.1Ti specimen but significantly lower than the non-ODS steel T91. The irradiation defects in the ODS steel specimens are apparently smaller than those in T91 with a similar number density. By calculating sink strength of the initial microstructures such as grains, dislocations and oxides, the evolution of irradiation defects was discussed. A linear relationship between the irradiation hardening and the sink strength was established. A similar linear relationship between the calculated irradiation hardening using the TEM data (based on dispersion barrier hardening model (DBH) and Friedel-Kroupa-Hirsch (FKH) model, respectively) and sink strength was also found. The calculated irradiation hardening is relatively lower than the experimental value, indicating the possible contribution of Cr segregation to hardening which needs further study.

Microstructure evolution and lead-bismuth eutectic corrosion behavior of 11Cr1Si ferritic/martensitic steel after proton irradiation

Microstructure response and lead-bismuth eutectic corrosion behavior of 11Cr1Si ferritic/martensitic steel after Au-ion irradiation

In-situ proton irradiation/lead-bismuth eutectic corrosion synergistic effect on corrosion behaviour of 11Cr1W1Si ferritic/martensitic steel

Modified microstructures in proton irradiated dual phase 308L weldment filler material

Effect of Au-ion irradiation on the morphology, microstructure and lead-bismuth eutectic corrosion behavior of refractory TiNbZrMoV high-entropy alloy coating

Structure of surface oxides on martensitic steel under simultaneous ion irradiation and molten LBE corrosion

Irradiation damage and corrosion performance of proton irradiated 304 L stainless steel fabricated by laser-powder bed fusion

Irradiation effects on microstructure, mechanical properties, and lead-bismuth eutectic corrosion resistance of alumina coating

Microstructure response and LBE corrosion behavior of the FeCrAlY coating after Au-ions irradiation

The microstructure effects on irradiation response of ferritic – martensitic steels

A comparison study of change in hardness and microstructures of a Zr-added FeCrAl ODS steel irradiated with heavy ions

Corrosion behaviour of 11Cr1Si ferritic/martensitic steel in static liquid lead-bismuth eutectic at 450-550 °C

Microstructure Changes of Domestic T91 and 316Ti Steels Irradiated by Xe+ Ions

Microstructure evolution and void swelling of ODS ferritic/martensitic steel under high damage irradiation

Effects of Fe-Ions Irradiation on the Microstructure and Mechanical Properties of FeCrAl-1.5wt.% ZrC Alloys

Effect of Irradiation on Austenite Phase in Thermally Aged 308 Stainless Steel Weld Metal

Effect of ion flux on one-dimensional migration of dislocation loops in Fe9Cr1.5W0.4Si F/M steel during in-situ Fe + irradiation

In-situ TEM observation of microstructure evolution in Fe9Cr1.5W0.4Si alloy during He+ irradiation and post-implantation annealing

Emulation of neutron damage with proton irradiation and its effects on microstructure and microchemistry of Zircaloy-4

Accelerated formation of M 2 C carbides by proton irradiation inhibits molten salt corrosion in Ni-based alloy

Irradiation-induced Grain Growth in Nanocrystalline Reduced Activation Ferrite/martensite Steel