Abstract:Solid polymer electrolyte (SPE) as core component of all-solid-state lithium metal battery (ASSLMB) has regained tremendous concerns due to its good flexibility and low cost. However, low ionic conductivity, unstable interphase and unsatisfying cycling stability hinder its practical application in ASSLMB. Herein, we designed a PEO-based SPE (PEO/20PAM/LiI) via adding optimum content of poly (acrylamide) (PAM) and 2 wt% LiI to address above issues. The amide groups (-(C=O)-(N-H)) in PAM could effectively facilitate the decomposition of LiTFSI due to the strong coordination of C=O/Li + and N-H/TFSI − , significantly releasing more "Free Li + ". The C=O group also weakens the coordination of Li + /ether oxygen and assists Li + transfer along the PEO chains, providing an efficient transmission pathway for Li + . Furthermore, LiI could facilitate the uniform Li + deposition at the electrode-electrolyte interface and stimulate the formation of stable interfacial layer, restraining the generation of lithium dendrites. The obtained PEO/20PAM/LiI exhibits high ionic conductivity (2.75 × 10 −4 S cm −1 , 35 °C), outstanding mechanical strength (0.55 MPa) and wide electrochemical window (∼ 5 V). The assembled Li symmetric battery could endure high critical current density (CCD, 1.8 mA cm −2 ) and perform Li plating/stripping steadily over 1600 h at 0.1 mA cm −2 at 35 °C. Meanwhile, LiFePO 4 (LFP)/Li ASSLMB with this SPE displays preeminent cycling stability over 250 cycles with high capacity retention (97.3%) and high coulombic efficiency (99.9%) at 0.3 C at 35 °C. This rational design strategy shows great potential in simultaneously realizing high ionic conductivity and good interfacial stability for ASSLMB.

Reducing interfacial resistance of a Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte/electrode interface by polymer interlayer protection

Reducing interfacial resistance of a Li<sub>1.5</sub>Al<sub>0.5</sub>Ge<sub>1.5</sub>(PO<sub>4</sub>)<sub>3</ sub> solid electrolyte/electrode interface by polymer interlayer protection

Reducing interfacial resistance of a Li<sub>1.5</sub>Al<sub>0.5</sub>Ge<sub>1.5</sub>(PO<sub>4</sub>)<sub>3</sub> solid electrolyte/electrode interface by polymer interlayer protection

Self-Sacrificed Interface-Based on the Flexible Composite Electrolyte for High-Performance All-Solid-State Lithium Batteries.

Li+ Conduction in a Polymer/Li1.5Al0.5Ge1.5(PO4)3 Solid Electrolyte and Li-Metal/Electrolyte Interface

Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Designing the Interface Layer of Solid Electrolytes for All‐Solid‐State Lithium Batteries

Inorganic/polymer Hybrid Layer Stabilizing Anode/electrolyte Interfaces in Solid-State Li Metal Batteries

Lithium Dendrite Suppression and Enhanced Interfacial Compatibility Enabled by an Ex Situ SEI on Li Anode for LAGP-Based All-Solid-State Batteries

Heterocyclic polymer supported cathode/Li interface layers to lower the operational temperature of PEO-based Li-batteries

Polymer/ceramic interfacial layer enables stable cycling of all-solid-state Li-metal batteries with sulfide electrolyte

Ceramic/Polymer Hybrid Electrolyte with Enhanced Interfacial Contact for All-Solid-State Lithium Batteries

Improving Cyclability of All‐Solid‐State Batteries via Stabilized Electrolyte–Electrode Interface with Additive in Poly(propylene carbonate) Based Solid Electrolyte

Polypropylene Carbonate-Based Adaptive Buffer Layer for Stable Interfaces of Solid Polymer Lithium Metal Batteries

Improving the Stability of Lithium Aluminum Germanium Phosphate with Lithium Metal by Interface Engineering

Stabilize Garnet/Electrode Interface via Low-melting Polymer Layer in Solid-state Lithium Metal Battery

Poly (ethylene oxide) based solid polymer electrolyte improved by multifunctional additives of poly (acrylamide) and LiI

Flame Retardant and Stable Li1.5Al0.5Ge1.5(PO4)3-Supported Ionic Liquid Gel Polymer Electrolytes for High Safety Rechargeable Solid-State Lithium Metal Batteries

Solid Polymer Electrolyte Reinforced with a Li1.3Al0.3Ti1.7(PO4)3-Coated Separator for All-Solid-State Lithium Batteries

In Situ Constructing Robust Interface by Deep Eutectic Polymeric Electrolyte Enables High Performance Lithium Metal Batteries with High‐Loading Cathode

Integrated solid electrolyte with porous cathode by facilely one-step sintering for an all-solid-state Li-O2 battery