Abstract:In situ polymerization is proposed to design high ionic conductivity and good interface contact solid polymer electrolytes. The constructed LiFePO4 (LFP) || Li cells with elaborately designed electrolyte exhibit 100% capacity retention after 100 cycles at −10 °C. The electrochemical stability of electrolyte is further enhanced by cyanoacrylate decoration. And the constructed LiCoO2 (LCO) || Li cell with modified electrolyte shows 93% of capacity retention under 4.5 V cut‐off voltage after 200 cycles. Solid‐state electrolytes (SSE) exhibit great promise in enhancing the safety of Li metal batteries by replacing flammable liquid electrolytes. However, the practical application of SSE is hampered mainly due to the poor electrode–electrolyte interface, low ion conductivity, and inferior electrochemical stability. Herein, superior nonflammable solid polymer electrolytes are elaborately designed by in situ encapsulating succinonitrile (SN)‐based deep eutectic solvent (DES) into the ethoxylated trimethylolpropane triacrylate (ETPTA) matrix (DES‐ETPTA). Benefiting from strong polarity and high anti‐oxidation capability, as‐prepared DES‐ETPTA electrolyte shows high ionic conductivity (9.55 × 10−4 S cm−1 at 30 °C), high Li+ transference number (0.68), and good electrochemical stability. As a result, the assembled LiFePO4 || Li full cells based on the designed DES‐ETPTA electrolyte deliver a high reversible capacity and capacity retention at −10 °C and room temperature. Furthermore, considering the compatibility with high‐voltage layered oxide cathode, the electrochemical stability of the ETPTA is further improved through the decoration of cyanoacrylate (CA) with strong electron‐withdrawing characteristic of C≡N. Consequently, the constructed 4.5 V LiCoO2 || Li full cells using DES‐ETPTA‐CA electrolyte deliver a high reversible capacity of 144 mAh g−1 and a superior retention rate of 93% after 200 cycles at 0.5 C. This work paves a new pathway to design high‐safety and high‐voltage solid polymer electrolytes for lithium metal batteries.

In Situ Constructing Robust Interface by Deep Eutectic Polymeric Electrolyte Enables High Performance Lithium Metal Batteries with High‐Loading Cathode

In Situ Polymerization Derived from PAN-Based Porous Membrane Realizing Double-Stabilized Interface and High Ionic Conductivity for Lithium-Metal Batteries

Dual-layer Composite Solid Polymer Electrolytes with Janus Properties for Interface Modification of Solid State Lithium Metal Batteries

In Situ Constructing Ultrathin, Robust‐Flexible Polymeric Electrolytes with Rapid Interfacial Ion Transport in Lithium Metal Batteries

An Interpenetrating Network Polycarbonate-Based Composite Electrolyte for High-Voltage All-Solid-state Lithium-Metal Batteries

Eutectic-Based Polymer Electrolyte with the Enhanced Lithium Salt Dissociation for High-Performance Lithium Metal Batteries

PEO-based Composite Solid Electrolyte for Lithium Battery with Enhanced Interface Structure

Dual-Salt-Containing Polymer Interlayer Stabilizes Solid-State Li-Metal Batteries with LiCoO 2 Cathodes

Poly(ethylene Oxide)/poly(vinylidene FLuoride)/li6.4la3zr1.4ta0.6o12 Composite Electrolyte with a Stable Interface for High Performance Solid State Lithium Metal Batteries

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

Constructing Robust LiF‐Enriched Interfaces in High‐Voltage Solid‐State Lithium Batteries Utilizing Tailored Oriented Ceramic Fiber Electrolytes

In Situ Formed Gel Polymer Electrolytes Enable Stable Solid Electrolyte Interface for High-Performance Lithium Metal Batteries

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

In Situ Constructing Robust and Highly Conductive Solid Electrolyte with Tailored Interfacial Chemistry for Durable Li Metal Batteries

Deep Eutectic Solvent‐Based Solid Polymer Electrolytes for High‐Voltage and High‐Safety Lithium Metal Batteries

Organic Cationic-Coordinated Perfluoropolymer Electrolytes with Strong Li+-Solvent Interaction for Solid State Li-Metal Batteries

Engineering a High-Voltage Durable Cathode/Electrolyte Interface for All-Solid-State Lithium Metal Batteries via In Situ Electropolymerization

Enabling Good Interfacial Stability by Dual-Salt Composite Electrolyte for Long Cycle Lithium Metal Batteries

In-Situ Synthesized Gel Polymer Electrolyte Enable High Capacity and Long-Cycle-Life Lithium Metal Batteries

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Rigid and flexible dual-network polymer electrolytes with enhanced interfacial interaction to accelerate Li+ transfer