Abstract:There is a growing interest in all-solid-state lithium batteries(ASLBs) for their safety and high energy density. However, the power density for ASLBs is still far away from satisfactory on the account of high interfacial resistance at electrode / solid electrolyte interface. For example, Garnet-type solid-state electrolytes (SSEs) are considered as a good choice for solid-state batteries, yet the interfacial issues with metallic Li limit their applications. In my group, we propose an ultra-simple and effective strategy to enhance the interfacial connection between garnet SSEs and Li metal just by drawing a graphite-based soft interface with a pencil[1]. Both experimental analysis and theoretical calculations confirm that the reaction between graphite-based interfacial layer and metallic lithium forms a lithiated connection interface with good lithium-ionic and electronic conductivity. Compared to the reported interfacial materials, the graphite material provides a soft interface with better ductility and compressibility. With the improvement by this soft interface, the impedance of symmetric Li cells significantly decreases from 1350 to 105Ωcm2 and the cell can cycle for over 1000hoursat a current density of 300 μA/cm2 at room temperature. Moreover, a solid-state battery with Li-metal anode, ternary cathode NCM523 and graphite-based interface modified garnet SSEs is fabricated and displays excellent rate capability and long cycling performance. In addition, LGPS-type materials show extremely high Li+ conductivity. But when in contact to Li metal, they can be reduced to produce Li2S, Li3P and Li-M alloy and form a mixed ionic and electronic conducting layer at the interface, which hinders the application of Li metal in such solid electrolyte system. We report on a simple approach for the modification of the interface between Li and Li10SnP2S12 sulfide solid electrolyte by utilizing ionic liquid[2]. Our study shows that the addition of 1.5M LiTFSI/Pyr13TFSI ionic liquid can not only promote intimate contact but can in-situ form a stable SEI layer at the interface between Li and solid electrolyte as well. A stable SEI layer instead of mixed conducting layer can prevent sulfide solid electrolyte from further decomposition and improve the cycle performance of batteries. References: 1) Y.J. Shao, H.C.Wang, et al ; ACS Energy Lett.; 2018, 3, 1212-1218 2) B.Z. Zheng; J.P.Zhu, et al; ACS Applied Mater. & Interfaces; 2018, 10, 25473-25482

Stabilize Garnet/Electrode Interface via Low-melting Polymer Layer in Solid-state Lithium Metal Battery

Asymmetrical Interface Modification Between Electrodes and Garnet-Type Electrolyte Enabling All-Solid-state Lithium Batteries

Enhancing interfacial stability in solid-state lithium batteries with polymer/garnet solid electrolyte and composite cathode framework

Stabilizing Solid Electrolyte/Li Interface Via Polymer-in-Salt Artificial Protection Layer for High-Rate and Stable Lithium Metal Batteries

An in Situ-Formed LiI Interface Layer for Garnet-Based Lithium Metal Batteries

Garnet Si-Li<sub>7</sub>La<sub>3</sub>Zr<sub>2</sub>O<sub>12</sub> electrolyte with a durable, low resistance interface layer for all-solid-state lithium metal batteries

In-situ constructing of dual bifunctional interfacial layers of garnet-type Li6.4La3Zr1.4Ta0.6O12 solid electrolyte towards long-cycle stability for flexible solid metal lithium batteries

Self-Sacrificed Interface-Based on the Flexible Composite Electrolyte for High-Performance All-Solid-State Lithium Batteries.

High-performance Solid-State Lithium Metal Batteries Achieved by Interface Modification

A Bridge Between Ceramics Electrolyte and Interface Layer to Fast Li+ Transfer for Low Interface Impedance Solid‐State Batteries

Smart Construction of an Intimate Lithium | Garnet Interface for All‐Solid‐State Batteries by Tuning the Tension of Molten Lithium

Ultrathin, Flexible Polymer Electrolyte for Cost‐Effective Fabrication of All‐Solid‐State Lithium Metal Batteries

Versatile Inorganic/Polymer Composite Electrolyte Added with 2-Methylsuccinic Anhydride via a Solvent-Free Preparation Method for High-Performance All-Solid-State Li-Metal Batteries: High Voltage, Long Cycle Life, and Room-Temperature Operation

An in-situ polymerized interphase engineering for high-voltage all-solid-state lithium-metal batteries

Novel PEO-based composite electrolyte for low-temperature all-solid-state lithium metal batteries enabled by interfacial cation-assistance

Percolated Sulfide in Salt-Concentrated Polymer Matrices Extricating High-Voltage All-Solid-State Lithium-metal Batteries

(Invited) Construction of Flexible Interfacial Layer for Solid-State Li Batteries

In-situ cross-linked multifunctional polymer electrolyte buffer layers for high-performance garnet solid-state lithium metal batteries

Garnet Li7La3Zr2O12-Based Solid-State Lithium Batteries Achieved by In Situ Thermally Polymerized Gel Polymer Electrolyte

In‐Situ Construction of Electronically Insulating and Air‐Stable Ionic Conductor Layer on Electrolyte Surface and Grain Boundary to Enable High‐Performance Garnet‐Type Solid‐State Batteries

Flexible Poly(ethylene Carbonate)/garnet Composite Solid Electrolyte Reinforced by Poly(vinylidene Fluoride-Hexafluoropropylene) for Lithium Metal Batteries