Abstract:There is a growing interest in all-solid-state lithium batteries(ASLBs) for their safety and high energy density. However, the power density for ASLBs is still far away from satisfactory on the account of high interfacial resistance at electrode / solid electrolyte interface. For example, Garnet-type solid-state electrolytes (SSEs) are considered as a good choice for solid-state batteries, yet the interfacial issues with metallic Li limit their applications. In my group, we propose an ultra-simple and effective strategy to enhance the interfacial connection between garnet SSEs and Li metal just by drawing a graphite-based soft interface with a pencil[1]. Both experimental analysis and theoretical calculations confirm that the reaction between graphite-based interfacial layer and metallic lithium forms a lithiated connection interface with good lithium-ionic and electronic conductivity. Compared to the reported interfacial materials, the graphite material provides a soft interface with better ductility and compressibility. With the improvement by this soft interface, the impedance of symmetric Li cells significantly decreases from 1350 to 105Ωcm2 and the cell can cycle for over 1000hoursat a current density of 300 μA/cm2 at room temperature. Moreover, a solid-state battery with Li-metal anode, ternary cathode NCM523 and graphite-based interface modified garnet SSEs is fabricated and displays excellent rate capability and long cycling performance. In addition, LGPS-type materials show extremely high Li+ conductivity. But when in contact to Li metal, they can be reduced to produce Li2S, Li3P and Li-M alloy and form a mixed ionic and electronic conducting layer at the interface, which hinders the application of Li metal in such solid electrolyte system. We report on a simple approach for the modification of the interface between Li and Li10SnP2S12 sulfide solid electrolyte by utilizing ionic liquid[2]. Our study shows that the addition of 1.5M LiTFSI/Pyr13TFSI ionic liquid can not only promote intimate contact but can in-situ form a stable SEI layer at the interface between Li and solid electrolyte as well. A stable SEI layer instead of mixed conducting layer can prevent sulfide solid electrolyte from further decomposition and improve the cycle performance of batteries. References: 1) Y.J. Shao, H.C.Wang, et al ; ACS Energy Lett.; 2018, 3, 1212-1218 2) B.Z. Zheng; J.P.Zhu, et al; ACS Applied Mater. & Interfaces; 2018, 10, 25473-25482

A Facile and Low-Cost Wet-Chemistry Artificial Interface Engineering for Garnet-Based Solid-State Li Metal Batteries

Facile Surface Modification Method to Achieve an Ultralow Interfacial Resistance in Garnet-Based Li Metal Batteries

A Superior Stable Interlayer For Dendrite-Free Solid-State Lithium Metal Batteries

Interface Engineering for Garnet-Type Electrolyte Enables Low Interfacial Resistance in Solid-State Lithium Batteries

A Fast and Low-Cost Interface Modification Method to Achieve High-Performance Garnet-Based Solid-State Lithium Metal Batteries

Construction of an Intimately Riveted Li/garnet Interface with Ultra-Low Interfacial Resistance for Solid-State Batteries

Interface engineering of Li6.75La3Zr1.75Ta0.25O12via in situ built LiI/ZnLix mixed buffer layer for solid-state lithium metal batteries

An in Situ-Formed LiI Interface Layer for Garnet-Based Lithium Metal Batteries

A Mortise-Tenon-like Ionic/electronic Conductive Interface Facilitates Long-Cycle Solid-State Lithium Metal Batteries

Enabling an Electron/ion Conductive Composite Lithium Anode for Solid-State Lithium-Metal Batteries with Garnet Electrolyte

Smart Construction of an Intimate Lithium | Garnet Interface for All‐Solid‐State Batteries by Tuning the Tension of Molten Lithium

Mortise-tenon-like ionic/electronic conductive interface facilitates long-cycle solid-state lithium metal batteries

Li2Se: A High Ionic Conductivity Interface to Inhibit the Growth of Lithium Dendrites in Garnet Solid Electrolytes

(Invited) Construction of Flexible Interfacial Layer for Solid-State Li Batteries

Asymmetrical Interface Modification Between Electrodes and Garnet-Type Electrolyte Enabling All-Solid-state Lithium Batteries

Reinforced Cathode-Garnet Interface for High-Capacity All-Solid-state Batteries

A lithium–tin fluoride anode enabled by ionic/electronic conductive paths for garnet-based solid-state lithium metal batteries

Reducing Interfacial Resistance Between Garnet-Structured Solid-State Electrolyte and Li-Metal Anode by A Germanium Layer

Tuning the Anode–Electrolyte Interface Chemistry for Garnet‐Based Solid‐State Li Metal Batteries

Negating Interfacial Impedance in Garnet-Based Solid-State Li Metal Batteries

Alleviating the Local Charge Accumulation at Li/garnet Interface Enabling Solid-State Lithium Batteries