Abstract:Lithium metal anode is recognized as the "Holy Grail" electrode because of its high specific capacity (3860 mAh/g) and low reduction potential (-3.04 V vs. standard hydrogen electrode), which is meaningful for batteries systems. Remarkable improvement of ionic conductivity of sulfide electrolyte exceeding 10 mS/cm at room temperature has opened up the opportunity to realized the commercialization of lithium metal anode. However, the practical implement of Li anode in solid-state batteries is hundered by the poor cycle stability and the low energy efficiency stemming from the unstable interfaces due to the ultrahigh reactivity of lithium metal. At the anode interface, the lithium dendrite growth and solid electrolytes (SE) reduction by lithium metal are serious challenges for lithium metal anode. To suppress the interfacial reactions and lithium dendrite formation at the sulfide electrolyte/Li metal anode interface, various strategies have been implemented by researchers, such as in situ formed robust SEI (solid electrolyte interface), surface modification and SE modification, etc. In this article, we focus on the artificial solid electrolyte interface (ASEI) to strengthening the Li metal and solid electrolyte interface. We fabricate the uniform LiF-rich ASEI using CF3(CF2)(3)OCH3 by heating at a temperature of 150 degrees C for 6 h. LiF layer at the interface between Li and sulfide electroyte could prevent Li dendrite growth. Compared to the Li/sulfide electrolyte interface, the Li/LiF/sulfide electrolyte interface is more stable. The symmetrical cell LiF@Li//Li6PS5Cl//LiF@Li (LiF@Li//LPSCl//LiF@Li) does not short-circuit after 40 cycles at the current density of 0.1 mAh/cm(2) with a lower polarization potential. A solid-state battery LiNbO2@LiCoO2//LPSCl//LiF@Li (LNO@LCO//LPSCl//LiF@Li) employing LiF coated Li metal as anode shows a high reversible discharge capacity of 138.4 mAh/g at 0.05 C and retains 110.9 mAh/g after 50 cycles. This interficial engineering for lithium metal and sulfide solid electrolyte provides new opportunity to commercialize the Li metal batteries.

Compositional Engineering of Lithium Metal Anode for High‐Performance Garnet‐Type Solid‐State Lithium Battery

Engineering Wavy‐Nanostructured Anode Interphases with Fast Ion Transfer Kinetics: Toward Practical Li‐Metal Full Batteries

Tuning the Anode–Electrolyte Interface Chemistry for Garnet‐Based Solid‐State Li Metal Batteries

A lithium–tin fluoride anode enabled by ionic/electronic conductive paths for garnet-based solid-state lithium metal batteries

Ultrastable Anode/Electrolyte Interface in Solid-State Lithium-Metal Batteries Using LiCu x Nanowire Network Host

Restrained Li|Garnet Interface Contact Deterioration Manipulated by Lithium Modification for Solid‐State Batteries

High-Performance Composite Lithium Anodes Enabled by Electronic/Ionic Dual-Conductive Paths for Solid-State Li Metal Batteries

A Facile and Low-Cost Wet-Chemistry Artificial Interface Engineering for Garnet-Based Solid-State Li Metal Batteries

In-situ Generated Li3N/Li-Al Alloy in Reduced Graphene Oxide Framework Optimizing Ultra-Thin Lithium Metal Electrode for Solid-State Batteries

A Stable Matrix Assisting Highly Compatible and Maintainable Lithium‐Garnet Interface for Solid‐State Batteries

Stable Li Metal Anode with Protected Interface for High-Performance Li Metal Batteries

Porous Lithiophilic Li–Si Alloy‐Type Interfacial Framework via Self‐Discharge Mechanism for Stable Lithium Metal Anode with Superior Rate

A Salt‐in‐Metal Anode: Stabilizing the Solid Electrolyte Interphase to Enable Prolonged Battery Cycling

Improvement of the Interface between the Lithium Anode and a Garnet-Type Solid Electrolyte of Lithium Batteries Using an Aluminum-Nitride Layer

Boosting fast interfacial Li+ transport in solid-state Li metal batteries via ultrathin Al buffer layer

Surface Engineered Li Metal Anode for All‐Solid‐State Lithium Metal Batteries with High Capacity

In Situ Lithiophilic Layer from H+/Li+ Exchange on Garnet Surface for the Stable Lithium-Solid Electrolyte Interface

Interficial Engineering of Lithium Metal Anode for Sulfide Solid State Batteries

Constructing a Superlithiophilic 3D Burr‐Microsphere Interface on Garnet for High‐Rate and Ultra‐Stable Solid‐State Li Batteries

A Sintering‐Free Cathode for Garnet‐Based All‐Solid‐State Li Metal Batteries

Optimization of Catholyte in Composite Cathodes for Garnet-Structured Llzo Electrolyte in Solid-State Batteries