Abstract:A stably lithiophilic Li2ZO3 is in situ constructed at garnet electrolyte surface and grain boundaries by interfacial modification with ZrO2 and Li2CO3 co‐sintering to eliminate the detrimental contaminants and lithium‐deficient phases, which significantly improves electrolyte air stability and provides a fast transport path for Li+ while hindering electron transport, ultimately enabling long cycle stability and dendrite‐free solid‐state batteries. Lithophobic Li2CO3/LiOH contaminants and high‐resistance lithium‐deficient phases produced from the exposure of garnet electrolyte to air leads to a decrease in electrolyte ion transfer ability. Additionally, garnet electrolyte grain boundaries (GBs) with narrow bandgap and high electron conductivity are potential channels for current leakage, which accelerate Li dendrites generation, ultimately leading to short‐circuiting of all‐solid‐state batteries (ASSBs). Herein, a stably lithiophilic Li2ZO3 is in situ constructed at garnet electrolyte surface and GBs by interfacial modification with ZrO2 and Li2CO3 (Z+C) co‐sintering to eliminate the detrimental contaminants and lithium‐deficient phases. The Li2ZO3 formed on the modified electrolyte (LLZTO‐(Z+C)) surface effectively improves the interfacial compatibility and air stability of the electrolyte. Li2ZO3 formed at GBs broadens the energy bandgaps of LLZTO‐(Z+C) and significantly inhibits lithium dendrite generation. More Li+ transport paths found in LLZTO‐Z+C by first‐principles calculations increase Li+ conductivity from 1.04×10−4 to 7.45×10−4 S cm−1. Eventually, the Li|LLZTO‐(Z+C)|Li symmetric cell maintains stable cycling for over 2000 h at 0.8 mA cm−2. The capacity retention of LiFePO4|LLZTO‐(Z+C)|Li battery retains 70.5% after 5800 ultralong cycles at 4 C. This work provides a potential solution to simultaneously enhance the air stability and modulate chemical characteristics of the garnet electrolyte surface and GBs for ASSBs.

In Situ Fabrication of High Ionic and Electronic Conductivity Interlayers Enabling Long-Life Garnet-Based Solid-State Lithium Batteries

An in Situ-Formed LiI Interface Layer for Garnet-Based Lithium Metal Batteries

Achieving Efficient and Stable Interface Between Metallic Lithium and Garnet-Type Solid Electrolyte Through a Thin Indium Tin Oxide Interlayer

In‐Situ Construction of Electronically Insulating and Air‐Stable Ionic Conductor Layer on Electrolyte Surface and Grain Boundary to Enable High‐Performance Garnet‐Type Solid‐State Batteries

In-situ construction of Li-Mg/LiF conductive layer to achieve an intimate lithium-garnet interface for all-solid-state Li metal battery

In-situ construction of multifunctional interlayer enabled dendrite-free garnet-based solid-state batteries

In Situ Construction of an Ultra‐Stable Conductive Composite Interface for High‐Voltage All‐Solid‐State Lithium Metal Batteries

An in Situ Formed Mosaic Li7Sn3-LiF Interface Layer for High-Rate and Long-Life Garnet-Based Lithium Metal Batteries.

Constructing a Li 2 O/LiZn Mixed Ionic Electron Conductive Layer by Ultrasonic Spraying to Enhance Li/Garnet Solid Electrolyte Interface Stability for Solid-State Batteries

Low-Temperature In Situ Lithiation Construction of a Lithiophilic Particle-Selective Interlayer for Solid-State Lithium Metal Batteries

In Situ Polymerization Inhibiting Electron Localization in Hybrid Electrolyte for Room‐Temperature Solid‐State Lithium Metal Batteries

A Facile and Low-Cost Wet-Chemistry Artificial Interface Engineering for Garnet-Based Solid-State Li Metal Batteries

In-situ cross-linked multifunctional polymer electrolyte buffer layers for high-performance garnet solid-state lithium metal batteries

Improving Bulk and Interfacial Lithium Transport in Garnet-Type Solid Electrolytes through Microstructure Optimization for High-Performance All-Solid-State Batteries

In situ construction of a multifunctional interlayer for garnet-type electrolytes to suppress lithium dendrite formation in solid-state lithium batteries

In-situ constructing of dual bifunctional interfacial layers of garnet-type Li6.4La3Zr1.4Ta0.6O12 solid electrolyte towards long-cycle stability for flexible solid metal lithium batteries

Remarkably Improved Ionic Conductivity and Lithium Metal Compatibility of LLZTO-Li4(BH4)3I Composite Solid-State Electrolyte

Garnet-type oxide electrolyte with novel porous-dense bilayer configuration for rechargeable all-solid-state lithium batteries

Restrained Li|Garnet Interface Contact Deterioration Manipulated by Lithium Modification for Solid‐State Batteries

Interface engineering of Li6.75La3Zr1.75Ta0.25O12via in situ built LiI/ZnLix mixed buffer layer for solid-state lithium metal batteries

Enhanced Critical Current Density in the Garnet Oxide Electrolyte by a Silver Interlayer