Abstract:A stably lithiophilic Li2ZO3 is in situ constructed at garnet electrolyte surface and grain boundaries by interfacial modification with ZrO2 and Li2CO3 co‐sintering to eliminate the detrimental contaminants and lithium‐deficient phases, which significantly improves electrolyte air stability and provides a fast transport path for Li+ while hindering electron transport, ultimately enabling long cycle stability and dendrite‐free solid‐state batteries. Lithophobic Li2CO3/LiOH contaminants and high‐resistance lithium‐deficient phases produced from the exposure of garnet electrolyte to air leads to a decrease in electrolyte ion transfer ability. Additionally, garnet electrolyte grain boundaries (GBs) with narrow bandgap and high electron conductivity are potential channels for current leakage, which accelerate Li dendrites generation, ultimately leading to short‐circuiting of all‐solid‐state batteries (ASSBs). Herein, a stably lithiophilic Li2ZO3 is in situ constructed at garnet electrolyte surface and GBs by interfacial modification with ZrO2 and Li2CO3 (Z+C) co‐sintering to eliminate the detrimental contaminants and lithium‐deficient phases. The Li2ZO3 formed on the modified electrolyte (LLZTO‐(Z+C)) surface effectively improves the interfacial compatibility and air stability of the electrolyte. Li2ZO3 formed at GBs broadens the energy bandgaps of LLZTO‐(Z+C) and significantly inhibits lithium dendrite generation. More Li+ transport paths found in LLZTO‐Z+C by first‐principles calculations increase Li+ conductivity from 1.04×10−4 to 7.45×10−4 S cm−1. Eventually, the Li|LLZTO‐(Z+C)|Li symmetric cell maintains stable cycling for over 2000 h at 0.8 mA cm−2. The capacity retention of LiFePO4|LLZTO‐(Z+C)|Li battery retains 70.5% after 5800 ultralong cycles at 4 C. This work provides a potential solution to simultaneously enhance the air stability and modulate chemical characteristics of the garnet electrolyte surface and GBs for ASSBs.

Achieving Efficient and Stable Interface Between Metallic Lithium and Garnet-Type Solid Electrolyte Through a Thin Indium Tin Oxide Interlayer

Facile Surface Modification Method to Achieve an Ultralow Interfacial Resistance in Garnet-Based Li Metal Batteries

In Situ Fabrication of High Ionic and Electronic Conductivity Interlayers Enabling Long-Life Garnet-Based Solid-State Lithium Batteries

An in Situ-Formed LiI Interface Layer for Garnet-Based Lithium Metal Batteries

Regulation Mechanism on A Bilayer Li 2 O‐Rich Interface between Lithium Metal and Garnet‐Type Solid Electrolytes

In-situ construction of Li-Mg/LiF conductive layer to achieve an intimate lithium-garnet interface for all-solid-state Li metal battery

In‐Situ Construction of Electronically Insulating and Air‐Stable Ionic Conductor Layer on Electrolyte Surface and Grain Boundary to Enable High‐Performance Garnet‐Type Solid‐State Batteries

Constructing a Multifunctional Interlayer toward Ultra‐High Critical Current Density for Garnet‐Based Solid‐State Lithium Batteries

In Situ Formed Surface Layer to Improve the Air Stability of LLZTO and Its Contact with the Li Metal

Li6.75La3Zr1.75Ta0.25O12@amorphous Li3OCl composite electrolyte for solid state lithium-metal batteries

One-Step Processing of Soft Electrolyte/Metallic Lithium Interface for High-Performance Solid-State Lithium Batteries

The Interface Between Li6.5La3Zr1.5Ta0.5O12 and Liquid Electrolyte

In-situ constructing of dual bifunctional interfacial layers of garnet-type Li6.4La3Zr1.4Ta0.6O12 solid electrolyte towards long-cycle stability for flexible solid metal lithium batteries

Synergistically enabling the interface stability of lithium metal batteries with soft ionic gel and garnet-type Li6.4La3Zr1.4Ta0.6O12 ceramic filler

Reducing Impedance at a Li-Metal Anode/Garnet-Type Electrolyte Interface Implementing Chemically Resolvable In Layers

Interface engineering of Li6.75La3Zr1.75Ta0.25O12via in situ built LiI/ZnLix mixed buffer layer for solid-state lithium metal batteries

An in Situ Formed Mosaic Li7Sn3-LiF Interface Layer for High-Rate and Long-Life Garnet-Based Lithium Metal Batteries.

Remarkably Improved Ionic Conductivity and Lithium Metal Compatibility of LLZTO-Li4(BH4)3I Composite Solid-State Electrolyte

In-situ cross-linked multifunctional polymer electrolyte buffer layers for high-performance garnet solid-state lithium metal batteries

Engineered interfaces between perovskite La2/3xLi3xTiO3 electrolyte and Li metal for solid-state batteries

Restrained Li|Garnet Interface Contact Deterioration Manipulated by Lithium Modification for Solid‐State Batteries