Abstract:Thin film deposition of solid electrolytes can be useful for the fabrication of better solid-state batteries by reducing the thickness of the electrolyte material to a few hundred nanometers. This facilitates ionic conductance for faster charge-discharge and reduces the total volume of inactive material, therefore increasing energy and power density. Thin film batteries can also be valuable model systems to investigate interface charge dynamics and to serve as playgrounds for interface engineering, without the complexity of bulk systems. Here we investigate the charge transfer properties between the lithium garnet Li 7 La 3 Zr 2 O 12 (LLZO) solid electrolyte and the LiCoO 2 cathode using a thin-film model system, with the aim of reducing the interface resistance and allowing high charge-discharge rates. Bulk LLZO electrolyte has come under the spotlight owing to its high ionic conductivities (10 -4 - 10 -3 S/cm) as well as a wide electrochemical stability window (against metallic lithium anode and high potential cathode materials). We developed a method for fabricating crystalline LLZO thin films using magnetron co-sputtering followed by an annealing step at 700°C (significantly below the standard processing temperatures). The resulting 500 nm-thick Ga-doped LLZO thin films show densities and ionic conductivities (2×10 -4 S/cm) comparable to the values observed in bulk ceramic pellets.[1] Based on this thin film fabrication process, we fabricated an all-thin-film model system to investigate the LLZO / LCO cathode interface. This architecture provides an easy access to the interface for characterization, allowing one to identify the degradation processes taking place at the interface under high-temperature co-sintering. Introducing an in situ-lithiated Nb 2 O 5 diffusion barrier at the interface, it was possible to lower the LLZO / LCO charge transfer resistance to about 50 Ω cm 2 , a 3-fold reduction with respect to previously reported values. The low interfacial resistance combined with the high conductance through the LLZO thin-film electrolyte allows charge transfer at high charge–discharge rates up to 40 C (0.9 mA/cm 2 ).[2] References [1] Sastre, Jordi, et al. "Lithium Garnet Li7La3Zr2O12 Electrolyte for All‐Solid‐State Batteries: Closing the Gap between Bulk and Thin Film Li‐Ion Conductivities." Advanced Materials Interfaces (2020): 2000425. [2] Sastre, Jordi, et al. "Fast Charge Transfer across the Li7La3Zr2O12 Solid Electrolyte/LiCoO2 Cathode Interface Enabled by an Interphase-Engineered All-Thin-Film Architecture." ACS Applied Materials & Interfaces 12.32 (2020): 36196-36207.

Reducing Impedance at a Li-Metal Anode/Garnet-Type Electrolyte Interface Implementing Chemically Resolvable In Layers

Facile Surface Modification Method to Achieve an Ultralow Interfacial Resistance in Garnet-Based Li Metal Batteries

Achieving Efficient and Stable Interface Between Metallic Lithium and Garnet-Type Solid Electrolyte Through a Thin Indium Tin Oxide Interlayer

In‐Situ Construction of Electronically Insulating and Air‐Stable Ionic Conductor Layer on Electrolyte Surface and Grain Boundary to Enable High‐Performance Garnet‐Type Solid‐State Batteries

An in Situ-Formed LiI Interface Layer for Garnet-Based Lithium Metal Batteries

Regulation Mechanism on A Bilayer Li 2 O‐Rich Interface between Lithium Metal and Garnet‐Type Solid Electrolytes

Negating Interfacial Impedance in Garnet-Based Solid-State Li Metal Batteries

One-Step Processing of Soft Electrolyte/Metallic Lithium Interface for High-Performance Solid-State Lithium Batteries

Self assembled electron blocking and lithiophilic interface towards dendrite-free solid-state lithium battery

A Simple and Efficient Strategy for Ameliorating Li/LLZO Interfacial Contact

In Situ Fabrication of High Ionic and Electronic Conductivity Interlayers Enabling Long-Life Garnet-Based Solid-State Lithium Batteries

In-situ construction of Li-Mg/LiF conductive layer to achieve an intimate lithium-garnet interface for all-solid-state Li metal battery

Asymmetrical Interface Modification Between Electrodes and Garnet-Type Electrolyte Enabling All-Solid-state Lithium Batteries

An in Situ Formed Mosaic Li7Sn3-LiF Interface Layer for High-Rate and Long-Life Garnet-Based Lithium Metal Batteries.

Fast Charge Transfer between LLZO Solid Electrolyte and LCO Cathode Thin Films with a Modified Interface

Constructing Low‐Impedance Li7La3Zr2O12‐Based Composite Cathode Interface for All‐Solid‐State Lithium Batteries

Constructing a Li2O/LiZn Mixed Ionic Electron Conductive Layer by Ultrasonic Spraying to Enhance Li/Garnet Solid Electrolyte Interface Stability for Solid-State Batteries.

Interface Engineering for Garnet-Type Electrolyte Enables Low Interfacial Resistance in Solid-State Lithium Batteries

In Situ Formed Surface Layer to Improve the Air Stability of LLZTO and Its Contact with the Li Metal

The Interface Between Li6.5La3Zr1.5Ta0.5O12 and Liquid Electrolyte

An <i>in situ</i>-formed high lithiophilic solid lubricant interface layer for garnet-based solid-state lithium metal batteries