Abstract:All-solid-state batteries have become the most potential next-generation energy-storage devices. However, it is quite difficult to simultaneously achieve a single solid-state electrolytes (SSEs) layer with both dendrite-free Li metal plating and low interfacial resistance between the cathode and SSEs. Herein, an integrated structure of cathode and double-layer solid electrolyte membrane (IS-CDL) is designed, which greatly improves the interfacial contact and suppresses the Li dendrite growth. The first "polymer in ceramic" solid electrolyte layer (SL1) consists of 80 wt % Li1.4Al0.4Ti1.6(PO4)3 (LATP) nanoparticles and 20 wt % polyethylene oxide (PEO), and the second polymer electrolyte layer is PEO-based solid electrolyte layer (SL2). The SL1 with high mechanical properties can hinder the growth of Li dendrites and reduce the interfacial resistance with the cathode. The SL2 can inhibit the side reaction between the Li metal and LATP. The Li symmetric cells with sandwich-type hierarchical electrolyte (SL2/SL1/SL2) can stably cycle over 3200 h at 0.1 mA cm–2 at 45 °C. The obtained all-solid-state LiFePO4–IS-CDL/Li batteries present a capacity of 142.6 mA h g–1 at 45 °C with the capacity retention of 91.7% after 100 cycles, and all-solid-state NCM811–IS-CDL/Li batteries deliver a specific capacity of 175.5 mA h g–1 at 60 °C. This work proposes an effective strategy to fabricate all-solid-state lithium batteries with high electrochemical performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16390?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16390</a>.Preparation of high mass loading cathode; SEM image of pristine LATP nanoparticles; optical images of the solid electrolyte membrane; EIS spectra of Li/LFP–IS–CSL1 cells and Li/LFP–IS–CDL cells; impedance spectra of solid electrolyte membranes; digital photographs of the lithium metal surface; charge and discharge curves; voltage profile of a symmetric cell; and cycling performances, EIS spectra, and charge–discharge voltage profiles of NCM811 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16390/suppl_file/am0c16390_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Polymer/ceramic interfacial layer enables stable cycling of all-solid-state Li-metal batteries with sulfide electrolyte

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

An asymmetric double-layer poly(ethylene oxide)/inorganic composite electrolyte for stable and dendrite-suppressing all-solid-state Li metal battery

Li 3 N interlayer enables stable long-term cycling for sulfide-based all-solid-state Li metal batteries

Designing the Interface Layer of Solid Electrolytes for All‐Solid‐State Lithium Batteries

In Situ Formed Protective Layer: Toward a More Stable Interface between the Lithium Metal Anode and Li 6 PS 5 Cl Solid Electrolyte

Enhanced Interphase Ion Transport via Charge‐Rich Space Charge Layers for Ultra‐Stable Solid‐State Lithium Metal Batteries

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

In-situ constructing of dual bifunctional interfacial layers of garnet-type Li6.4La3Zr1.4Ta0.6O12 solid electrolyte towards long-cycle stability for flexible solid metal lithium batteries

Poly(ethylene oxide)-based composite solid electrolyte for long cycle life solid-state lithium metal batteries: Improvement of interface stability through a dual mechanism

A Multilayer Ceramic Electrolyte for All-Solid-State Li Batteries

A Hybrid LiCl/LixSn Conductive Interlayer to Unlock the Potential of Solid‐State Lithium Metal Batteries

Facile interfacial adhesion enabled LATP-based solid-state lithium metal battery

Constructing Multifunctional Interphase between Li1.4Al0.4Ti1.6(PO4)(3) and Li Metal by Magnetron Sputtering for Highly Stable Solid-State Lithium Metal Batteries

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

In Situ Gelation of a 1,3-Dioxolane Dual-Permeable Porous Tandem Framework with Excellent Interfacial Stability to Power Long-Cycling Solid-State Lithium Metal Batteries

The construction of multifunctional solid electrolyte interlayers for stabilizing Li6PS5Cl-based all-solid-state lithium metal batteries

Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Stable Interface Between Lithium and Electrolyte Facilitated by a Nanocomposite Protective Layer

Construction of Polyvinylidene Fluoride Buffer Layers for Li1.3Al0.3Ti1.7(PO4)(3) Solid-State Electrolytes toward Stable Dendrite-Free Lithium Metal Batteries

In situ modified sulfide solid electrolyte enabling stable lithium metal batteries