Abstract:There is a growing interest in all-solid-state lithium batteries(ASLBs) for their safety and high energy density. However, the power density for ASLBs is still far away from satisfactory on the account of high interfacial resistance at electrode / solid electrolyte interface. For example, Garnet-type solid-state electrolytes (SSEs) are considered as a good choice for solid-state batteries, yet the interfacial issues with metallic Li limit their applications. In my group, we propose an ultra-simple and effective strategy to enhance the interfacial connection between garnet SSEs and Li metal just by drawing a graphite-based soft interface with a pencil[1]. Both experimental analysis and theoretical calculations confirm that the reaction between graphite-based interfacial layer and metallic lithium forms a lithiated connection interface with good lithium-ionic and electronic conductivity. Compared to the reported interfacial materials, the graphite material provides a soft interface with better ductility and compressibility. With the improvement by this soft interface, the impedance of symmetric Li cells significantly decreases from 1350 to 105Ωcm2 and the cell can cycle for over 1000hoursat a current density of 300 μA/cm2 at room temperature. Moreover, a solid-state battery with Li-metal anode, ternary cathode NCM523 and graphite-based interface modified garnet SSEs is fabricated and displays excellent rate capability and long cycling performance. In addition, LGPS-type materials show extremely high Li+ conductivity. But when in contact to Li metal, they can be reduced to produce Li2S, Li3P and Li-M alloy and form a mixed ionic and electronic conducting layer at the interface, which hinders the application of Li metal in such solid electrolyte system. We report on a simple approach for the modification of the interface between Li and Li10SnP2S12 sulfide solid electrolyte by utilizing ionic liquid[2]. Our study shows that the addition of 1.5M LiTFSI/Pyr13TFSI ionic liquid can not only promote intimate contact but can in-situ form a stable SEI layer at the interface between Li and solid electrolyte as well. A stable SEI layer instead of mixed conducting layer can prevent sulfide solid electrolyte from further decomposition and improve the cycle performance of batteries. References: 1) Y.J. Shao, H.C.Wang, et al ; ACS Energy Lett.; 2018, 3, 1212-1218 2) B.Z. Zheng; J.P.Zhu, et al; ACS Applied Mater. & Interfaces; 2018, 10, 25473-25482

In Situ Formed Protective Layer: Toward a More Stable Interface between the Lithium Metal Anode and Li 6 PS 5 Cl Solid Electrolyte

In Situ Formed Protective Layer: Toward a More Stable Interface Between the Lithium Metal Anode and Li6PS5Cl Solid Electrolyte

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

A Superior Stable Interlayer For Dendrite-Free Solid-State Lithium Metal Batteries

Boosting the Interfacial Stability of the Li6PS5Cl Electrolyte with a Li Anode via In Situ Formation of a LiF-Rich SEI Layer and a Ductile Sulfide Composite Solid Electrolyte

The construction of multifunctional solid electrolyte interlayers for stabilizing Li6PS5Cl-based all-solid-state lithium metal batteries

Sustained Release‐Driven Formation of Ultrastable SEI between Li 6 PS 5 Cl and Lithium Anode for Sulfide‐Based Solid‐State Batteries

In situ formed interfacial layer for all-solid-state lithium batteries with sulfide electrolyte films

A robust solid electrolyte interphase enabled by solvate ionic liquid for high-performance sulfide-based all-solid-state lithium metal batteries

Built-in superionic conductive phases enabling dendrite-free, long lifespan and high specific capacity composite lithium for stable solid-state lithium batteries

Efficient Construction of a C60 Interlayer for Mechanically Robust, Dendrite-free, and Ultrastable Solid-State Batteries

Enabling high-performance all-solid-state lithium batteries with high ionic conductive sulfide-based composite solid electrolyte and ex-situ artificial SEI film

Lithium Dendrite Suppression and Enhanced Interfacial Compatibility Enabled by an Ex Situ SEI on Li Anode for LAGP-Based All-Solid-State Batteries

Stabilizing Li7P3S11/lithium metal anode interface by in-situ bifunctional composite layer

Long‐Life Lithium‐Metal All‐Solid‐State Batteries and Stable Li Plating Enabled by In‐situ Formation of Li3PS4 in SEI Layer

Double-Faced Bond Coupling to Induce an Ultrastable Lithium/Li 6 PS 5 Cl Interface for High-Performance All-Solid-State Batteries

(Invited) Construction of Flexible Interfacial Layer for Solid-State Li Batteries

An armor-like artificial solid electrolyte interphase layer for high performance lithium-sulfur batteries

Toward Ultrastable Metal Anode/Li<sub>6</sub>PS<sub>5</sub>Cl Interface via an Interlayer as Li Reservoir

An in Situ-Formed LiI Interface Layer for Garnet-Based Lithium Metal Batteries

Interface Stability Of Licl-Rich Argyrodite Li6ps5cl With Propylene Carbonate Boosts High-Performance Lithium Batteries