Abstract:Lithium metal anode is recognized as the "Holy Grail" electrode because of its high specific capacity (3860 mAh/g) and low reduction potential (-3.04 V vs. standard hydrogen electrode), which is meaningful for batteries systems. Remarkable improvement of ionic conductivity of sulfide electrolyte exceeding 10 mS/cm at room temperature has opened up the opportunity to realized the commercialization of lithium metal anode. However, the practical implement of Li anode in solid-state batteries is hundered by the poor cycle stability and the low energy efficiency stemming from the unstable interfaces due to the ultrahigh reactivity of lithium metal. At the anode interface, the lithium dendrite growth and solid electrolytes (SE) reduction by lithium metal are serious challenges for lithium metal anode. To suppress the interfacial reactions and lithium dendrite formation at the sulfide electrolyte/Li metal anode interface, various strategies have been implemented by researchers, such as in situ formed robust SEI (solid electrolyte interface), surface modification and SE modification, etc. In this article, we focus on the artificial solid electrolyte interface (ASEI) to strengthening the Li metal and solid electrolyte interface. We fabricate the uniform LiF-rich ASEI using CF3(CF2)(3)OCH3 by heating at a temperature of 150 degrees C for 6 h. LiF layer at the interface between Li and sulfide electroyte could prevent Li dendrite growth. Compared to the Li/sulfide electrolyte interface, the Li/LiF/sulfide electrolyte interface is more stable. The symmetrical cell LiF@Li//Li6PS5Cl//LiF@Li (LiF@Li//LPSCl//LiF@Li) does not short-circuit after 40 cycles at the current density of 0.1 mAh/cm(2) with a lower polarization potential. A solid-state battery LiNbO2@LiCoO2//LPSCl//LiF@Li (LNO@LCO//LPSCl//LiF@Li) employing LiF coated Li metal as anode shows a high reversible discharge capacity of 138.4 mAh/g at 0.05 C and retains 110.9 mAh/g after 50 cycles. This interficial engineering for lithium metal and sulfide solid electrolyte provides new opportunity to commercialize the Li metal batteries.

In Situ Ion‐Conducting Protective Layer Strategy to Stable Lithium Metal Anode for All‐Solid‐State Sulfide‐Based Lithium Metal Batteries

Self-Adaptive and Electric Field-Driven Protective Layer with Anchored Lithium Deposition Enable Stable Lithium Metal Anode

Toward Ultrastable Metal Anode/Li 6 PS 5 Cl Interface via an Interlayer as Li Reservoir

Toward Ultrastable Metal Anode/Li<sub>6</sub>PS<sub>5</sub>Cl Interface via an Interlayer as Li Reservoir

In Situ Formed Protective Layer: Toward a More Stable Interface between the Lithium Metal Anode and Li 6 PS 5 Cl Solid Electrolyte

Toward Ultrastable Metal Anode/Li6PS5Cl Interface Via an Interlayer As Li Reservoir

In Situ Surface Film Formed by Solid‐State Anodic Oxidation for Stable Lithium Metal Anodes

In Situ‐Formed Dual‐Conductive Protecting Layer for Dendrite‐Free Li Metal Anodes in All‐Solid‐State Batteries

Surface Engineered Li Metal Anode for All‐Solid‐State Lithium Metal Batteries with High Capacity

In‐Situ Constructing a Mixed‐Conductive Interfacial Protective Layer for Ultra‐Stable Lithium Metal Anodes

In situ Triggered Rich‐LiF/Mg Multifunctional Passivation Layer for Modifying the Anode Interface of All‐Solid‐State Lithium Metal Batteries

Construction of sticky ionic conductive buffer layer for inorganic electrolyte toward stable all-solid-state lithium metal batteries

Interficial Engineering of Lithium Metal Anode for Sulfide Solid State Batteries

The construction of multifunctional solid electrolyte interlayers for stabilizing Li6PS5Cl-based all-solid-state lithium metal batteries

In Situ Formed LiI Interfacial Layer for All-Solid-State Lithium Batteries with Li6PS5Cl Solid Electrolyte Membranes.

Enhanced Interphase Ion Transport via Charge‐Rich Space Charge Layers for Ultra‐Stable Solid‐State Lithium Metal Batteries

In Situ Li3 PS4 Solid-State Electrolyte Protection Layers for Superior Long-Life and High-Rate Lithium-Metal Anodes.

An Air‐Stable and Dendrite‐Free Li Anode for Highly Stable All‐Solid‐State Sulfide‐Based Li Batteries

In-situ construction of Li-Ag/LiF composite layer for long cycled all-solid-state Li metal battery

Stabilizing Li7P3S11/lithium metal anode interface by in-situ bifunctional composite layer

In situ modified sulfide solid electrolyte enabling stable lithium metal batteries