Abstract:Due to its good mechanical properties and high ionic conductivity, the sulfide-type solid electrolyte (SE) can potentially realize all-solid-state batteries (ASSBs). Nevertheless, challenges, including limited electrochemical stability, insufficient solid–solid contact with the electrode, and reactivity with lithium, must be addressed. These challenges contribute to dendrite growth and electrolyte reduction. Herein, a straightforward and solvent-free method was devised to generate a robust artificial interphase between lithium metal and a SE. It is achieved through the incorporation of a composite electrolyte composed of Li6PS5Cl (LPSC), polyethylene glycol (PEG), and lithium bis(fluorosulfonyl)imide (LiFSI), resulting in the in situ creation of a LiF-rich interfacial layer. This interphase effectively mitigates electrolyte reduction and promotes lithium-ion diffusion. Interestingly, including PEG as an additive increases mechanical strength by enhancing adhesion between sulfide particles and improves the physical contact between the LPSC SE and the lithium anode by enhancing the ductility of the LPSC SE. Moreover, it acts as a protective barrier, preventing direct contact between the SE and the Li anode, thereby inhibiting electrolyte decomposition and reducing the electronic conductivity of the composite SE, thus mitigating the dendrite growth. The Li|Li symmetric cells demonstrated remarkable cycling stability, maintaining consistent performance for over 3000 h at a current density of 0.1 mA cm–2, and the critical current density of the composite solid electrolyte (CSE) reaches 4.75 mA cm–2. Moreover, the all-solid-state lithium metal battery (ASSLMB) cell with the CSEs exhibits remarkable cycling stability and rate performance. This study highlights the synergistic combination of the in-situ-generated artificial SE interphase layer and CSEs, enabling high-performance ASSLMBs.

Long‐Life Lithium‐Metal All‐Solid‐State Batteries and Stable Li Plating Enabled by In‐situ Formation of Li3PS4 in SEI Layer

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Fast and Stable Charge Transfer at Lithium-Sulfide (Electrolyte) Interface via In-Situ Solidified Li+-Conductive Interlayer

Lithium Dendrite Suppression and Enhanced Interfacial Compatibility Enabled by an Ex Situ SEI on Li Anode for LAGP-Based All-Solid-State Batteries

Boosting the Interfacial Stability of the Li6PS5Cl Electrolyte with a Li Anode via In Situ Formation of a LiF-Rich SEI Layer and a Ductile Sulfide Composite Solid Electrolyte

Stable all-solid-state lithium metal batteries enabled by ultrathin LiF/Li3Sb hybrid interface layer

In situ formation of polymer-inorganic solid-electrolyte interphase for stable polymeric solid-state lithium-metal batteries

In Situ Co-Growth Lif-Li3n Rich Dual-Protective Layers Enable High Interface Stability for Solid-State Lithium-Metal Batteries

In Situ Formed Protective Layer: Toward a More Stable Interface Between the Lithium Metal Anode and Li6PS5Cl Solid Electrolyte

In Situ Formed Protective Layer: Toward a More Stable Interface between the Lithium Metal Anode and Li 6 PS 5 Cl Solid Electrolyte

Poly(ethylene oxide)-based composite solid electrolyte for long cycle life solid-state lithium metal batteries: Improvement of interface stability through a dual mechanism

Sustained Release‐Driven Formation of Ultrastable SEI between Li 6 PS 5 Cl and Lithium Anode for Sulfide‐Based Solid‐State Batteries

Stabilization of Lithium Metal Interfaces by Constructing Composite Artificial Solid Electrolyte Interface with Mesoporous TiO2 and Perfluoropolymers

Superior Lithium-Metal All-Solid-State Batteries with In-situ formed Li 3 N-LiF-rich Interphase

Lithiated Copper Polyphthalocyanine with Extended pi-Conjugation Induces LiF-Rich Solid Electrolyte Interphase toward Long-Life Solid-State Lithium-Metal Batteries

Organophosphorus Hybrid Solid Electrolyte Interphase Layer Based on LixPO4 Enables Uniform Lithium Deposition for High‐Performance Lithium Metal Batteries

Organosulfide-plasticized Solid-Electrolyte Interphase Layer Enables Stable Lithium Metal Anodes for Long-Cycle Lithium-Sulfur Batteries.

Lithiated Copper Polyphthalocyanine with Extended -Conjugation Induces LiF-Rich Solid Electrolyte Interphase toward Long-Life Solid-State Lithium-Metal Batteries

In situ formed interfacial layer for all-solid-state lithium batteries with sulfide electrolyte films

Lithiated Copper Polyphthalocyanine with Extended π‐Conjugation Induces LiF‐Rich Solid Electrolyte Interphase toward Long‐Life Solid‐State Lithium‐Metal Batteries