Abstract:As one of the most promising cathode materials in lithium-ion batteries, nickel-rich cathode materials have been widely studied due to their high specific capacity and high operating voltage to realize the energy density of 300 Wh kg–1. However, the oxidative decomposition of electrolyte catalyzed by transition metal ions and the crack of secondary particles have brought great challenges to their further development. In order to solve this problem, functionalized electrolyte is often used to stabilize the interface and structure of cathode materials. Herein, it is proposed to add trimethyl borate (TMB) in commercial electrolyte to enhance the interfacial stability of LiNi0.88Co0.09Al0.03O2 cathode material. By adjusting the content of TMB in the electrolyte, it is found that a volume ratio of 10% can achieve the best electrochemical performance. In the voltage range of 3.0–4.3 V, the LiNi0.88Co0.09Al0.03O2 electrode with the 10% TMB-containing electrolyte can achieve a capacity retention of up to 82% after 300 cycles at 1C rate (1C = 200 mA g–1), while the electrode with blank electrolyte is only 61%. Through a systematic analysis toward cycled electrode materials, it is indicated that the cracking degree of secondary particles decreases and a thin, stable, and conductive cathode electrolyte interface film is formed on the electrode with 10% TMB-containing electrolyte. This simple and effective method of improving the interfacial and structural stability of nickel-rich cathode materials via adding TMB in the electrolyte provides a practical strategy for the development of high-performance lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c09241?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c09241</a>.The density, viscosity, and conductivity results; contact angle test; cycle performance in different voltage ranges; dQ/dV profiles; the fitting data and Bode plots of EIS spectra; TEM of electrodes after the first cycle; the XPS survey spectra; atomic concentration of each element of fresh electrode and electrodes after 300 cycles in blank and 10% TMB-containing electrolytes; XPS spectra of electrodes after the first cycle; FTIR results for fresh electrode and electrodes after 300 cycles in blank and 10% TMB-containing electrolytes; and mechanisms for electrochemical oxidative decomposition of TMB (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c09241/suppl_file/sc0c09241_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Pre-term pre-labour rupture of membranes: Effect of chorioamnionitis on overall neonatal outcome

Triphenylphosphine Oxide as Highly Effective Electrolyte Additive for Graphite/NMC811 Lithium Ion Cells

Nonsacrificial Nitrile Additive for Armoring High-Voltage LiNi0.83 Co0.07 Mn0.1 O2 Cathode with Reliable Electrode-Electrolyte Interface toward Durable Battery.

Trimethoxyboroxine As an Electrolyte Additive to Enhance the 4.5 V Cycling Performance of a Ni-rich Layered Oxide Cathode

Construction of low‐impedance and high‐passivated interphase for nickel‐rich cathode by low‐cost boron‐containing electrolyte additive

An Interfacial Mechanism of Chelate-Borate Electrolyte Additives in Ni-Rich LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Stabilization of NCM811 cathode interface through macromolecular compound protective film formed by 2,5-bis(2,2,2-trifluoroethoxy)-benzoic acid additive in lithium metal batteries

Simultaneous modulation of cathode/anode and electrolyte interfaces via a nitrile additive for high-energy-density lithium-metal batteries

3-(Trifluoromethyl)benzoylacetonitrile: A multi-functional safe electrolyte additive for LiNi0.8Co0.1Mn0.1O2 cathode of high voltage lithium-ion battery

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

A Novel 4‐Fluorophenyl Isocyanate Additive Constructing Solid Cathodes‐Electrolyte Interface for High‐Performance Lithium‐Ion Batteries

Stabilizing Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode by generating ion-conductive polymer coating layer with 1, 3-dioxolane introducing electrolyte for lithium-ion batteries

Concerted Effect of Ion- and Electron-Conductive Additives on the Electrochemical and Thermal Performances of the LiNi0.8Co0.1Mn0.1O2 Cathode Material Synthesized by a Taylor-Flow Reactor for Lithium-Ion Batteries

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Multifunctional Electrolyte Additive Stabilizes Electrode–Electrolyte Interface Layers for High-Voltage Lithium Metal Batteries

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Enabling LiNi 0.88 Co 0.09 Al 0.03 O 2 Cathode Materials with Stable Interface by Modifying Electrolyte with Trimethyl Borate