Abstract:Compared with other commercial cathode materials, the LiNi0.8Co0.1Mn0.1O2 cathode (NCM811) has high specific capacity and a relatively low cost. Nevertheless, the higher nickel content in NCM811 leads to an extremely unstable interface between the electrode and the electrolyte, resulting in inferior cyclic stability of the corresponding cell. Use of film-forming additives is regarded as the most feasible and economic approach to construct a stable interface on the NCM811 cathode. However, less effective electrolyte additives have been reported to date. Herein, we propose a valid film-forming electrolyte additive, 2,4,6-triphenyl boroxine (TPBX), for application in a high-voltage NCM811 cathode. Experimental and computational results reveal that the TPBX additive can be preferentially oxidized to generate a highly stable and conductive cathode electrolyte interface (CEI) layer on the NCM811 cathode, which efficiently suppresses the detrimental side reaction and improves the electrochemical performance eventually. In detail, the cyclic stability of the Li/NCM811 half-cell is enhanced from 57% (without additive) to 78% (with 5% TPBX) after 200 cycles at 1C between 3.0 and 4.35 V. At a high current rate of 15C, the TPBX-containing electrode delivers a capacity of about 135 mAh g-1, which is much higher than that of the electrode without the additive (80 mAh g-1). Interestingly, the TPBX is also reduced earlier than the ethylene carbonate (EC) solvent to form an ionically conductive solid electrolyte interface (SEI) film on the graphite anode. Due to the CEI layer on the cathode and the SEI film on the anode simultaneously formed by the TPBX additive, the cyclic performance of the graphite/LiNi0.8Co0.1Mn0.1O2 full cell is enhanced. Therefore, the incorporation of the TPBX additive into the electrolyte provides a convenient method for the commercial application of the high-energy-density NCM811 cathode in high-voltage lithium-ion batteries.

Construction of low‐impedance and high‐passivated interphase for nickel‐rich cathode by low‐cost boron‐containing electrolyte additive

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries

Constructing a Low-Impedance Interface on a High-Voltage LiNi0.8Co0.1Mn0.1O2 Cathode with 2,4,6-Triphenyl Boroxine as a Film-Forming Electrolyte Additive for Li-Ion Batteries

In-situ construction of hierarchical cathode electrolyte interphase for high performance LiNi0.8Co0.1Mn0.1O2/Li metal battery

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Nonsacrificial Nitrile Additive for Armoring High-Voltage LiNi0.83 Co0.07 Mn0.1 O2 Cathode with Reliable Electrode-Electrolyte Interface toward Durable Battery.

Optimizing interphase structure to enhance electrochemical performance of high voltage LiNi0.5Mn1.5O4 cathode via anhydride additives

High-voltage electrolyte design for a Ni-rich layered oxide cathode for lithium-ion batteries

Stabilization of NCM811 cathode interface through macromolecular compound protective film formed by 2,5-bis(2,2,2-trifluoroethoxy)-benzoic acid additive in lithium metal batteries

Constructing LiF/Li2CO3-rich heterostructured electrode electrolyte interphases by electrolyte additive for 4.5 V well-cycled lithium metal batteries

An Interphase Engineering Method of Stabilizing Ni‐rich Cathode in Lithium‐ion Batteries by A Nucleophilic‐based Additive

Self-repaired Cathode Electrolyte Interphase to Stabilize the High-Nickel Cathode Interface by a Sustained-Release Multifunctional Electrolyte Additive

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Electrolytes Polymerization‐Induced Cathode‐Electrolyte‐Interphase for High Voltage Lithium‐Ion Batteries

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries

Stabilizing Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode by generating ion-conductive polymer coating layer with 1, 3-dioxolane introducing electrolyte for lithium-ion batteries

Stabilization of NCM811 cathode for Li-ion batteries by N-doped carbon coating

Carbonized Polymer Dots Enhancing Interface Stability of LiNi0.8Co0.1Mn0.1O2 Cathodes

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries