Abstract:In this study, we synthesized a Li-containing “BTJ-L” hybrid oligomerobtained through polymerization of bismaleimide (BMI) with a polyether monoamine (i.e., Jeffamine-M1000, JA), trithiocyanuric acid (TCA), and LiOHand coated it as an additive in various amounts (0.5–2 wt %) onto the surface of a Ni-rich LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode active material, forming BTJ-L@NCM811 electrodes for lithium-ion batteries (LIBs). Relative to CR2032 coin-type cells incorporating a pristine NCM811 electrode, the cells with the 1 wt % BTJ-L@NCM811 electrode demonstrated a slightly higher initial discharge capacity (173 mAh g–1 vs171 mAh g–1) and higher values of average Coulombic efficiency, CEavg (99.5% vs98.9%) and capacity retention, CR (86.1% vs72.9%) after 100 cycles at 1C. Electrochemical impedance spectroscopy revealed that the decrease in the charge transfer resistance (R ct: 46.7 Ω vs171.1 Ω) and the superior Li+ ion diffusivity (D Li +: ∼1.09 × 10–12 cm2 s–1 vs ∼1.61 × 10–13 cm2 s–1) of the cells incorporating the BTJ-L@NCM811 electrode after cycling at 1C could be attributed to the excellent wettability toward the electrolyte and the extra Li+ ions contributed by the hybrid BTJ-L oligomer additive. Therefore, the BTJ-L oligomer coating layer functioned much like an artificial cathode electrolyte interphase (CEI) layer, impairing the dissolution of transition metals (TMs) from the cathode materials into the carbonate-based electrolytes. Furthermore, in situ microcalorimetry manifested that the total exothermic heat generation (Q t) of the coin cells containing the 1 wt % BTJ-L@NCM811 electrode operating at 1C in isothermal modes (35 and 55 °C) during the charging process was dramatically lower (by ca. 45%) relative to that of the cells incorporating the pristine NCM811 electrode. On the basis of an ARC-HWS analysis, the delithiated pristine NCM811 electrode shows thermal reactivity with the electrolyte at a much earlier stage in comparison to the 1 wt % BTJ-L@NCM811 counterpart (843 min vs 1039 min) between 171 and 192 °C. Thus, Ni-rich NCM811 cathode materials coated with trace amounts (i.e., 1 wt %) of the BTJ211-L1 hybrid oligomer additives displayed both enhanced electrochemical performance and remarkably improved thermal stability. Accordingly, this Li-containing BTJ-L hybrid oligomer appears to be a great candidate material for coating high-Ni oxide cathode materials to enhance the safety and electrochemical performance of LIB cells.

Concerted Effect of Ion- and Electron-Conductive Additives on the Electrochemical and Thermal Performances of the LiNi0.8Co0.1Mn0.1O2 Cathode Material Synthesized by a Taylor-Flow Reactor for Lithium-Ion Batteries

Surface Coating of NCM-811 Cathode Materials with G-C3n4 for Enhanced Electrochemical Performance.

Enhanced Electrochemical Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Materials Modified with Lithium‐Ion Conductive Coating LiNbO3

Coating of a Novel Lithium-Containing Hybrid Oligomer Additive on Nickel-Rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Materials for High-Stability and High-Safety Lithium-Ion Batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Alleviating Surface Degradation of Nickel-Rich Layered Oxide Cathode Material by Encapsulating with Nanoscale Li-Ions/Electrons Superionic Conductors Hybrid Membrane for Advanced Li-Ion Batteries.

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

Mitigating the Surface Reconstruction of Ni-Rich Cathode <i>via</i> P2-Type Mn-Rich Oxide Coating for Durable Lithium Ion Batteries

Carbonized Polymer Dots Enhancing Interface Stability of LiNi0.8Co0.1Mn0.1O2 Cathodes

Improving electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode for Li-ion batteries by dual-conductive coating layer of PPy and LiAlO2

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

Enhanced electrochemical performance of LiV2O4-coated and V4+-doped LiNi0.8Co0.1Mn0.1O2 cathode for lithium-ion batteries

Improving Fast Charging-Discharging Performances of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Cathode Material by Electronic Conductor LaNiO3 Crystallites

Multifunctional High-Efficiency Additive with Synergistic Anion and Cation Coordination for High-Performance LiNi 0.8 Co 0.1 Mn 0.1 O 2 Lithium Metal Batteries

A synergetic modification approach toward high capacity Ni-rich cathode materials for next generation lithium-ion batteries

Nonsacrificial Nitrile Additive for Armoring High-Voltage LiNi0.83 Co0.07 Mn0.1 O2 Cathode with Reliable Electrode-Electrolyte Interface toward Durable Battery.

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

(Keynote) MnPO4-Coating for Improved Long-Term Performance of Li(Ni0.4Co0.2Mn0.4)O2 in Ionic Liquid-Based Electrolytes

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material