Abstract:Combining the surface modification with bulk doping by ZnO, the co-modification strategy was applied to improve the structural stabilities and electrochemical properties of the layered Ni-rich LiNi0 · 8Co0 · 1Mn0 · 1O2 cathode materials. The spherical morphology with a surface coating layer and evenly distributed Ni, Co, Mn, and Zn elements for the co-modified samples were demonstrated by the scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images, together with the corresponding elemental mapping. Although the Ni2+ was increased near the surface, according to the X-ray photoelectron spectroscopy (XPS) results, the Li+/Ni2+ cation mixing remained constant based on the Rietveld refinement results. The electrochemical demonstrated its superior capacity retention with respect to the unmodified sample, especially in the first 300 cycles. Meanwhile, the co-modified sample also exhibited slower discharge voltage decay with inhibited electrode polarization, as well as lower interfacial resistances and faster Li-ions diffusion kinetics after 200 cycles in comparison with the pristine sample. The structure and morphology analysis results of the cycled electrodes revealed that the co-modified strategy of ZnO efficiently alleviates the structural pulverization of the spherical particles and successfully avoids the irreversible phase transformation towards the rock-salt phase. These results confirmed that the co-modified strategy of Zn2+ bulk doping and ZnO surface coating is highly conducive to the improvement of structural stabilities and electrochemical properties of the layered LiNi0 · 8Co0 · 1Mn0 · 1O2 cathode materials.

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material

Improving electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode for Li-ion batteries by dual-conductive coating layer of PPy and LiAlO2

An effective modification strategy enhancing the structure stability and electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries

Protective and ion conductive: Ni-Rich cathode with enhanced electrochemical performance via dual-modification

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Simultaneous Li2MoO4 coating and Mo6+ doping improves the structural stability and electrochemical properties of nickel-rich LiNi0.83Co0.11Mn0.06O2

Constructing Electronic and Ionic Conductive Double Coating to Achieve Superior Structure Stability and Electrochemical Properties of LiNi0.90Co0.04Mn0.03Al0.03O2

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Enhanced electrochemical performance of cobalt oxide layers coated LiNi0.8Co0.1Mn0.1O2 by polyvinylpyrrolidone-assisted method cathode for Li-ion batteries

A Novel Perovskite Electron-Ion Conductive Coating to Simultaneously Enhance Cycling Stability and Rate Capability of Li1.2Ni0.13Co0.13Mn0.54O2 Cathode Material for Lithium-Ion Batteries

Boosting the performance of LiNi0.90Co0.06Mn0.04O2 electrode by uniform Li3PO4 coating via atomic layer deposition

A Co-Modified strategy for enhanced structural stability and long cycling life of Ni-Rich LiNi0.8Co0.1Mn0.1O2 cathode material

Enhanced Electrochemical Performance of Dual-Conductive Layers Coated Ni-rich LiNi0.6Co0.2Mn0.2O2 Cathode for Li-ion Batteries at High Cut-off Voltage

Sol/Antisolvent Coating for High Initial Coulombic Efficiency and Ultra-stable Mechanical Integrity of Ni-Rich Cathode Materials

Realizing Dual Functions through Y2O3 Modification to Enhance the Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Material

Protective and ion conductive: High-Rate Ni-Rich cathode with enhanced cyclic stability via One-Step bifunctional dual-layer coating

Al2O3 coated single-crystalline hexagonal nanosheets of LiNi0.6Co0.2Mn0.2O2 cathode materials for the high-performance lithium-ion batteries

Plasma-induced amorphous N-nano carbon shell for improving structural stability of LiNi0.8Co0.1Mn0.1O2 cathode

A Novel Perovskite Electron–Ion Conductive Coating to Simultaneously Enhance Cycling Stability and Rate Capability of Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 Cathode Material for Lithium‐Ion Batteries