Abstract:Combining the surface modification with bulk doping by ZnO, the co-modification strategy was applied to improve the structural stabilities and electrochemical properties of the layered Ni-rich LiNi0 · 8Co0 · 1Mn0 · 1O2 cathode materials. The spherical morphology with a surface coating layer and evenly distributed Ni, Co, Mn, and Zn elements for the co-modified samples were demonstrated by the scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images, together with the corresponding elemental mapping. Although the Ni2+ was increased near the surface, according to the X-ray photoelectron spectroscopy (XPS) results, the Li+/Ni2+ cation mixing remained constant based on the Rietveld refinement results. The electrochemical demonstrated its superior capacity retention with respect to the unmodified sample, especially in the first 300 cycles. Meanwhile, the co-modified sample also exhibited slower discharge voltage decay with inhibited electrode polarization, as well as lower interfacial resistances and faster Li-ions diffusion kinetics after 200 cycles in comparison with the pristine sample. The structure and morphology analysis results of the cycled electrodes revealed that the co-modified strategy of ZnO efficiently alleviates the structural pulverization of the spherical particles and successfully avoids the irreversible phase transformation towards the rock-salt phase. These results confirmed that the co-modified strategy of Zn2+ bulk doping and ZnO surface coating is highly conducive to the improvement of structural stabilities and electrochemical properties of the layered LiNi0 · 8Co0 · 1Mn0 · 1O2 cathode materials.

A Co-Modified strategy for enhanced structural stability and long cycling life of Ni-Rich LiNi0.8Co0.1Mn0.1O2 cathode material

Enhancement structural stability of LiNi0.8Co0.1Mn0.1O2 via S2− doping combine with Li2SO4 coating co-modification

In-situ construction protective layer and phosphate doping synergistically improve the long-term cycle stability of LiNi0.6Co0.1Mn0.3O2

Enhancing cycle life of LiNi0.95Co0.04Mn0.01O2 cathode by bulk W-doping and surface Co-doping

Improving the cycling and air-storage stability of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> through integrated surface/interface/doping engineering

Simultaneous Li2MoO4 coating and Mo6+ doping improves the structural stability and electrochemical properties of nickel-rich LiNi0.83Co0.11Mn0.06O2

An effective modification strategy enhancing the structure stability and electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries

An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes

Enabling high-rate discharge capability and stable cycling for Ni-rich layered cathodes via multi-functional modification strategy

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Dual modification of LiNi0.95Co0.04Mn0.01O2 for enhancing its cycling stability in lithium-ion batteries

Synthesis of LiNi0.9Co0.05Mn0.05O2 and modification with co-doping of Zr4+ and W6+ using acid leaching solution from spent lithium-ion batteries

Surface Cobaltization for Boosted Kinetics and Excellent Stability of Nickel-rich Layered Cathodes

Microstructure boosting the cycling stability of LiNi0.6Co0.2Mn0.2O2 cathode through Zr-based dual modification

Stabilizing the surface of LiNi0.815Co0.15Al0.035O2 by a facile pre-oxidation-coating strategy on the precursor

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

Improved High Rate Capability of Li[Li0.2Mn0.534Co0.133Ni0.133]O2 Cathode Material by Surface Modification with Co3O4

Collaboratively enhancing electrochemical properties of LiNi0.83Co0.11Mn0.06O2 through doping and coating of quadrivalent elements

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V