Abstract:Combining the surface modification with bulk doping by ZnO, the co-modification strategy was applied to improve the structural stabilities and electrochemical properties of the layered Ni-rich LiNi0 · 8Co0 · 1Mn0 · 1O2 cathode materials. The spherical morphology with a surface coating layer and evenly distributed Ni, Co, Mn, and Zn elements for the co-modified samples were demonstrated by the scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images, together with the corresponding elemental mapping. Although the Ni2+ was increased near the surface, according to the X-ray photoelectron spectroscopy (XPS) results, the Li+/Ni2+ cation mixing remained constant based on the Rietveld refinement results. The electrochemical demonstrated its superior capacity retention with respect to the unmodified sample, especially in the first 300 cycles. Meanwhile, the co-modified sample also exhibited slower discharge voltage decay with inhibited electrode polarization, as well as lower interfacial resistances and faster Li-ions diffusion kinetics after 200 cycles in comparison with the pristine sample. The structure and morphology analysis results of the cycled electrodes revealed that the co-modified strategy of ZnO efficiently alleviates the structural pulverization of the spherical particles and successfully avoids the irreversible phase transformation towards the rock-salt phase. These results confirmed that the co-modified strategy of Zn2+ bulk doping and ZnO surface coating is highly conducive to the improvement of structural stabilities and electrochemical properties of the layered LiNi0 · 8Co0 · 1Mn0 · 1O2 cathode materials.

Dual modification of LiNi0.95Co0.04Mn0.01O2 for enhancing its cycling stability in lithium-ion batteries

Dual-Functional Tungsten Boosted Lithium-Ion Diffusion and Structural Integrity of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes for High Performance Lithium-Ion Batteries

Enhancing cycle life of LiNi0.95Co0.04Mn0.01O2 cathode by bulk W-doping and surface Co-doping

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

A Co-Modified strategy for enhanced structural stability and long cycling life of Ni-Rich LiNi0.8Co0.1Mn0.1O2 cathode material

Enhancement structural stability of LiNi0.8Co0.1Mn0.1O2 via S2− doping combine with Li2SO4 coating co-modification

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Synthesis of LiNi0.9Co0.05Mn0.05O2 and modification with co-doping of Zr4+ and W6+ using acid leaching solution from spent lithium-ion batteries

An effective modification strategy enhancing the structure stability and electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries

An Mg–Al dual doping strategy to enhance the structural stability and long cycle life of LiNi0.8Co0.1Mn0.1O2 cathode material

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Dual Modification Strategy for Enhanced Cycling and Rate Performance of Ni-Rich Cathode Materials in Lithium-Ion Batteries

Suppressing capacity fading and voltage decay of Ni-rich cathode material by dual-ion doping for lithium-ion batteries

An effective co-modification strategy to enhance the cycle stability of LiNi 0.8 Co 0.1 Mn 0.1 O 2 for lithium-ion batteries

Dual-site lattice co-doping strategy regulated crystal-structure and microstructure for enhanced cycling stability of Co-free Ni-rich layered cathode

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

An effective dual-modification strategy to enhance the performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode for Li-ion batteries

Modification study of Mg/W-doped LiNi0.9Mn0.1O2 layered oxide cathode materials for lithium-ion batteries

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material

Tuning the surface of LiNi0.8Co0.1Mn0.1O2 primary particle with lithium boron oxide toward stable cycling

Simultaneous B/W Dual Coating on Ultra-High Nickel Single Crystal Cathode Material for Lithium-Ion Batteries