Abstract:Nickel-rich layered oxides, as the most promising commercial cathode material for high-energy density lithium-ion batteries, experience significant surface structural instabilities that lead to severe capacity deterioration and poor thermal stability. To address these issues, radially aligned grains and surface LixNiyWzO-like heterostructures are designed and obtained with a simple tungsten modification strategy in the LiNi0.91Co0.045Mn0.045O2 cathode. The formation of radially aligned grains, manipulated by the WO3 modifier during synthesis, provides a fast Li+ diffusion channel during the charge/discharge process. Moreover, the tungsten tends to enter into the lattice of the primary particle surface, and the armor-type tungsten-rich heterostructure protects the bulk material from microcracks, structural transformations, and surface side reactions. First-principles calculations indicate that oxygen is more stable in the surface tungsten-rich heterostructure than elsewhere, thus triggering an improved surface structural stability. Consequently, the 2 wt % WO3-modified LiNi0.91Co0.045Mn0.045O2 () material shows outstanding prolonged cycling performance (capacity retention of 80.85% after 500 cycles) and excellent rate performance (5 C, 188.4 mA h g–1). In addition, its layered-to-rock salt phase transition temperature is increased by 80 °C compared with that of the pristine cathode. This work provides a novel surface modification approach and an in-depth understanding of the overall performance enhancement of nickel-rich layered cathodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12893?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12893</a>.SEM images of the raw materials; SEM images of the intermediate materials; SEM images for the lithiated cathode materials; cross-sectional images; TEM images with EDS mapping and line scans; XRD patterns for the lithiated cathode materials; Rietveld fitting results for the XRD patterns; DFT calculation models of a W atom in different substitution sites; XPS spectra and fitting results; electrochemical performance between 2.5 and 4.3 V; electrochemical performance between 2.7 and 4.5 V; full pouch-type cell cyclability; GITT curves; cyclic voltammogram curves; in situ XRD patterns during the charging process; X-ray diffraction patterns after 200 cycles; equivalent circuit of EIS fitting; schematic illustration of the fading mechanism; in situ XRD patterns during the heating experiment; DSC profiles; TG/DSC profiles; DFT calculation models in different sites; ICP-AES results; crystallographic results; XPS fitting results; cycling performance results; rate performance results; GITT results; comparison of electrochemical performance results; EIS results; and charges gain/loss results (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12893/suppl_file/am0c12893_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Simultaneous B/W Dual Coating on Ultra-High Nickel Single Crystal Cathode Material for Lithium-Ion Batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Sol/Antisolvent Coating for High Initial Coulombic Efficiency and Ultra-stable Mechanical Integrity of Ni-Rich Cathode Materials

B<sub>2</sub>O<sub>3</sub>/LiBO<sub>2</sub> dual-modification layer stabilized Ni-rich cathode for lithium-ion battery

B2O3/LiBO2 dual-modification layer stabilized Ni-rich cathode for lithium-ion battery

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Dual-functional boron-modification on a cobalt-free single-crystal layered cathode for high-voltage lithium-ion batteries

Regulating the Grain Orientation and Surface Structure of Primary Particles through Tungsten Modification to Comprehensively Enhance the Performance of Nickel-Rich Cathode Materials

Tuning the surface of LiNi0.8Co0.1Mn0.1O2 primary particle with lithium boron oxide toward stable cycling

A novel perspective on surface modification of LiNi0.5Co0.2Mn0.3O2 cathode materialfor lithium‐ion batteries

Enhanced cycling stability of single-crystal LiNi0.83Co0.07Mn0.10O2 by Li-reactive coating with H3BO3

Dual-Functional Tungsten Boosted Lithium-Ion Diffusion and Structural Integrity of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes for High Performance Lithium-Ion Batteries

Enhanced rate performance and mitigated capacity decay of single-crystal LiNi0.8Co0.1Mn0.1O2 by the synergism of Mg doping and V2O5 coating

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Enhanced High-Voltage Cycling Stability of Ni-rich LiNi0.8Co0.1Mn0.1O2 Cathode Coated with Li2O–2B2O3

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

W Modification of Nickel-Rich Ternary Cathode Material for Efficient Lithium-Ion Batteries

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries

Modifying surface chemistry and stress concentration to enable highly stable ultrahigh-Ni cathodes