Abstract:In spite of the advantages of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathode materials such as high energy density and high capacity, their capacity decay during cycling is still a significant problem, which are mainly due to the internal structural collapse and the surge in interfacial impedance caused by interfacial side reactions. To address these issues, wet chemical methods and annealing treatments were used to create LiV 2 O 4 -coated and V 4+ -doped NCM811 cathode materials. The LiV 2 O 4 coating layer and the doped V 4+ had little effect on the crystal structure of the NCM811, according to X-ray powder diffraction and Rietveld refinement studies. Scanning electron microscopy, energy dispersive spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy data all showed that the LiV 2 O 4 layer was successfully coated on the surface of the spherical particles and some of the V 4+ was successfully introduced into the bulk phase. Thanks to the ion-conducting layer, LiV 2 O 4 , the interfacial impedance was reduced while the Li + diffusion rate was accelerated, and the V 4+ doped into the bulk phase stabilizes the internal structure, significantly increasing the cycling stability and the rate performance of NCM811. In particular, when the coating amount was 0.6 wt%, the initial discharge specific capacity reached 203.5 mAh/g at 2.8–4.3 V at 0.1 C, and the retention rate was 87.6% after 100 cycles, which was 12.1% higher compared to 75.5% of the original sample. And when the rate was raised to 5 C, the original sample's capacity plummeted to only about 100 mAh/g, but the sample with 0.6 wt% of coating was still 140.9 mAh/g. Experiments confirmed that this LiV 2 O 4 coating modification with synergistic V 4+ doping provided an innovative technique for boosting the electrochemical performance of Ni-rich ternary cathode materials.

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Effect of Nb 5+ Doping and LiNbO 3 Coating on the Structure and Surface of a LiNi 0.8 Mn 0.2 O 2 Cathode Material for Lithium-Ion Batteries

An effective modification strategy enhancing the structure stability and electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Investigation of structure and cycling performance of Nb5+ doped high‐nickel ternary cathode materials

Improving the Performance of LiNi0.925Co0.065Mn0.01O2 via Ti4+& Nb5+ Co-Modifications

Improved Electrochemical Performance of Nb5+ Doped NCM Cathode Upon 4.5 V Application Beneficial from the Suppressed H2-H3 Phase Transition and Promoted Li+ Migration Kinetics

A new high-valence cation pillar within the Li layer of compositionally optimized Ni-rich LiNi 0.9 Co 0.1 O 2 with improved structural stability for Li-ion battery

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Effects of Nb substitution on structure and electrochemical properties of LiNi0.7Mn0.3O2 cathode materials

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

Improving the Electrochemical Performance of Li-rich Li1.2Ni0.2Mn0.6O2 by Using Ni-Mn Oxide Surface Modification

Design of Nb5+-doped high-nickel layered ternary cathode material and its structure stability

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Investigation of Li 3 PO 4 Coating and Nb 5+ Doping Effect on the Crystal Structure and Electrochemical Properties of Ni-Rich LiNi 0.85 Co 0.05 Mn 0.10 O 2 Cathode

Simultaneous Li2MoO4 coating and Mo6+ doping improves the structural stability and electrochemical properties of nickel-rich LiNi0.83Co0.11Mn0.06O2

Enhanced electrochemical performance of LiV2O4-coated and V4+-doped LiNi0.8Co0.1Mn0.1O2 cathode for lithium-ion batteries

High-Ni layered LiNi0.83Co0.11Mn0.06O2 modified by Nb for Li-ion batteries

Improved electrochemical performance of Nb 5+ doped NCM cathode upon 4.5 V application beneficial from the suppressed H2-H3 phase transition and promoted Li + migration kinetics

Insight into the effect of Nb5+ on the crystal structure and electrochemical performance of the Li-rich cathode materials