Abstract:As one of the most promising cathode materials in lithium-ion batteries, nickel-rich cathode materials have been widely studied due to their high specific capacity and high operating voltage to realize the energy density of 300 Wh kg–1. However, the oxidative decomposition of electrolyte catalyzed by transition metal ions and the crack of secondary particles have brought great challenges to their further development. In order to solve this problem, functionalized electrolyte is often used to stabilize the interface and structure of cathode materials. Herein, it is proposed to add trimethyl borate (TMB) in commercial electrolyte to enhance the interfacial stability of LiNi0.88Co0.09Al0.03O2 cathode material. By adjusting the content of TMB in the electrolyte, it is found that a volume ratio of 10% can achieve the best electrochemical performance. In the voltage range of 3.0–4.3 V, the LiNi0.88Co0.09Al0.03O2 electrode with the 10% TMB-containing electrolyte can achieve a capacity retention of up to 82% after 300 cycles at 1C rate (1C = 200 mA g–1), while the electrode with blank electrolyte is only 61%. Through a systematic analysis toward cycled electrode materials, it is indicated that the cracking degree of secondary particles decreases and a thin, stable, and conductive cathode electrolyte interface film is formed on the electrode with 10% TMB-containing electrolyte. This simple and effective method of improving the interfacial and structural stability of nickel-rich cathode materials via adding TMB in the electrolyte provides a practical strategy for the development of high-performance lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c09241?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c09241</a>.The density, viscosity, and conductivity results; contact angle test; cycle performance in different voltage ranges; dQ/dV profiles; the fitting data and Bode plots of EIS spectra; TEM of electrodes after the first cycle; the XPS survey spectra; atomic concentration of each element of fresh electrode and electrodes after 300 cycles in blank and 10% TMB-containing electrolytes; XPS spectra of electrodes after the first cycle; FTIR results for fresh electrode and electrodes after 300 cycles in blank and 10% TMB-containing electrolytes; and mechanisms for electrochemical oxidative decomposition of TMB (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c09241/suppl_file/sc0c09241_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enabling LiNi 0.88 Co 0.09 Al 0.03 O 2 Cathode Materials with Stable Interface by Modifying Electrolyte with Trimethyl Borate

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Synergy Effect of Trimethyl Borate on Protecting High-Voltage Cathode Materials in Dual-Additive Electrolytes

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

A novel perspective on surface modification of LiNi0.5Co0.2Mn0.3O2 cathode materialfor lithium‐ion batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

B<sub>2</sub>O<sub>3</sub>/LiBO<sub>2</sub> dual-modification layer stabilized Ni-rich cathode for lithium-ion battery

Improved interfacial properties of LiNi0.8Co0.15Al0.05O2 cathode by tris(trimethylsilyl) borate as an electrolyte additive to inhibit HF formation

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Nonsacrificial Nitrile Additive for Armoring High-Voltage LiNi0.83 Co0.07 Mn0.1 O2 Cathode with Reliable Electrode-Electrolyte Interface toward Durable Battery.

Tuning the surface of LiNi0.8Co0.1Mn0.1O2 primary particle with lithium boron oxide toward stable cycling

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

An Interfacial Mechanism of Chelate-Borate Electrolyte Additives in Ni-Rich LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

High-Efficiency Electrolyte for Li-Rich Cathode Materials Achieving Enhanced Cycle Stability and Suppressed Voltage Fading Capable of Practical Applications on a Li-Ion Battery

Trimethoxyboroxine As an Electrolyte Additive to Enhance the 4.5 V Cycling Performance of a Ni-rich Layered Oxide Cathode

Stabilized Cathode Interphase for Enhancing Electrochemical Performance of LiNi 0.5 Mn 1.5 O 4 -Based Lithium-Ion Battery via cis -1,2,3,6-Tetrahydrophthalic Anhydride

Enhanced structurally stable cathodes by surface and grain boundary tailoring of Ni-Rich material with molybdenum trioxide

Constructing a Low-Impedance Interface on a High-Voltage LiNi0.8Co0.1Mn0.1O2 Cathode with 2,4,6-Triphenyl Boroxine as a Film-Forming Electrolyte Additive for Li-Ion Batteries

Ta doping and LiTaO3 coating to improve the electrochemical performance of LiNi0.925Co0.03Mn0.045O2 cathode material for lithium ion batteries