Abstract:As one of the most promising cathode materials in lithium-ion batteries, nickel-rich cathode materials have been widely studied due to their high specific capacity and high operating voltage to realize the energy density of 300 Wh kg–1. However, the oxidative decomposition of electrolyte catalyzed by transition metal ions and the crack of secondary particles have brought great challenges to their further development. In order to solve this problem, functionalized electrolyte is often used to stabilize the interface and structure of cathode materials. Herein, it is proposed to add trimethyl borate (TMB) in commercial electrolyte to enhance the interfacial stability of LiNi0.88Co0.09Al0.03O2 cathode material. By adjusting the content of TMB in the electrolyte, it is found that a volume ratio of 10% can achieve the best electrochemical performance. In the voltage range of 3.0–4.3 V, the LiNi0.88Co0.09Al0.03O2 electrode with the 10% TMB-containing electrolyte can achieve a capacity retention of up to 82% after 300 cycles at 1C rate (1C = 200 mA g–1), while the electrode with blank electrolyte is only 61%. Through a systematic analysis toward cycled electrode materials, it is indicated that the cracking degree of secondary particles decreases and a thin, stable, and conductive cathode electrolyte interface film is formed on the electrode with 10% TMB-containing electrolyte. This simple and effective method of improving the interfacial and structural stability of nickel-rich cathode materials via adding TMB in the electrolyte provides a practical strategy for the development of high-performance lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c09241?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c09241</a>.The density, viscosity, and conductivity results; contact angle test; cycle performance in different voltage ranges; dQ/dV profiles; the fitting data and Bode plots of EIS spectra; TEM of electrodes after the first cycle; the XPS survey spectra; atomic concentration of each element of fresh electrode and electrodes after 300 cycles in blank and 10% TMB-containing electrolytes; XPS spectra of electrodes after the first cycle; FTIR results for fresh electrode and electrodes after 300 cycles in blank and 10% TMB-containing electrolytes; and mechanisms for electrochemical oxidative decomposition of TMB (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c09241/suppl_file/sc0c09241_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Trimethoxyboroxine As an Electrolyte Additive to Enhance the 4.5 V Cycling Performance of a Ni-rich Layered Oxide Cathode

Constructing a Low-Impedance Interface on a High-Voltage LiNi0.8Co0.1Mn0.1O2 Cathode with 2,4,6-Triphenyl Boroxine as a Film-Forming Electrolyte Additive for Li-Ion Batteries

Triphenylphosphine Oxide as Highly Effective Electrolyte Additive for Graphite/NMC811 Lithium Ion Cells

Improving the Cycling Performance of High-Voltage NMC111 || Graphite Lithium Ion Cells by an Effective Urea-Based Electrolyte Additive

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

Conductive Robust Interfaces with Fluoro-Borate Based Electrolyte Additive for 4.6 V Well-Cycled LiNi0.90Co0.06Mn0.04O2||Li Batteries

Enabling LiNi 0.88 Co 0.09 Al 0.03 O 2 Cathode Materials with Stable Interface by Modifying Electrolyte with Trimethyl Borate

Stabilizing Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode by generating ion-conductive polymer coating layer with 1, 3-dioxolane introducing electrolyte for lithium-ion batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Dual Role of Bis(borate) Additive in Electrode/Electrolyte Interface Layer Construction for High-Voltage NCM 523 Cathode

Synergy Effect of Trimethyl Borate on Protecting High-Voltage Cathode Materials in Dual-Additive Electrolytes

Construction of internal electric field to suppress oxygen evolution of Ni-rich cathode materials at a high cutoff voltage

Enhancement of high voltage cycling performance and thermal stability of LiNi 1/3 Co 1/3 Mn 1/3 O 2 cathode by use of boron-based additives

High-voltage electrolyte design for a Ni-rich layered oxide cathode for lithium-ion batteries

Stable and Fast Ion Transport Electrolyte Interfaces Modified with Novel Fluorine- and Nitrogen-Containing Solvents for Ni-Rich Cathode Materials

Cost-Efficient Film-Forming Additive for High-Voltage Lithium–Nickel–Manganese Oxide Cathodes

Improving the Cycling Stability of NCM811 at High‐Voltage 4.5V in Ester‐Based Electrolytes with LiDFOB

The Effect of Trimethoxyboroxine on Some Positive Electrodes for Li-Ion Batteries

Stabilized Cathode Interphase for Enhancing Electrochemical Performance of LiNi 0.5 Mn 1.5 O 4 -Based Lithium-Ion Battery via cis -1,2,3,6-Tetrahydrophthalic Anhydride

Conductive Li+ Moieties‐Rich Cathode Electrolyte Interphase with Electrolyte Additive for 4.6 V Well‐Cycled Li||LiCoO2 Batteries

Trimethoxyboroxine As an Electrolyte Additive to Enhance the 4.5 ​V Cycling Performance of a Ni-rich Layered Oxide Cathode